Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

FM Conversion?
#1

Hello Ron, I've got my 41-287 operating again and sounding great but I really miss FM. Would it be possible to add an FM tuner to this radio maybe connecting it through the "Television" feature switch? Many years ago I built an Eico FM tuner kit which I wired into a Magnavox hifi . Has this ever been done on an antique radio? Thanks in advance for any information, JEP
#2

There were a number of FM converters sold in the 60's for car radios that would work with AM radios, and send the siignal to the AM radio. Haven't seen one in many years, but they were cheap and plentiful in their day. Probably some still around.
#3

And don't forget the Pilotuner (T601) if you want to stay within the same timeframe. The generally only fetch $20-30 on ebay and are simple to get going. Better still is the Howard unit, model 482. Both of these deliver an audio output suitable for the inputs of many old radios. I use a Howard with my Midwest 16 tube 'table' set. Icon_smile



Note from site admin: Sorry, but the photos which were attached to this post are no longer available.
#4

Thanks, codefox and exray. So far no luck on e-bay but will keep trying. JEP




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM

[-]
Who's Online
There are currently 930 online users. [Complete List]
» 4 Member(s) | 926 Guest(s)
AvatarAvatarAvatarAvatar

>