Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Trying to remember a Zenith Stereo
#1

I thought I would try posting in this section as the unit I am thinking of is indeed a stereo. I can recall trying to get one of these off eBay years ago, but the prices were always high. I also saw one in the flesh about five years ago, but it was being worked on for a customer at the shop.
I am at least wanting to research one of these, so here goes with a description. What I am taking about is a Zenith, table stereo. From what I recall it had speakers that folded shut across the front, had the AM-FM tuner as well as a phonograph that unfolded from the front (once the speakers were opened up of course!). It is a full tube unit, no transistors that I can recall. Also, it looks a bit like an old TV from the back as it has a molded back due to using the tube chassis. Now, does anyone here know what I am talking about?  Icon_eh Trying to do a Google search just makes me want to pick up this laptop and fling it out the window! Icon_lolno

No matter where you go, there you are.
#2

You thinking of something like this?
https://www.ebay.com/itm/Vintage-Zenith-...2498695233
Don't know if it is a tube or ss.
#3

That one sure looks like an old TV when it's folded up! Gotta be it!
#4

That's it! Thank you! Icon_clap   It is a 10 tube unit from what I just found out. Looks like it's basically my small console Zenith Stereo packed into a table case. Definitely uses the same output tubes. If only that one on eBay was closer to me.. Icon_think

No matter where you go, there you are.
#5

If you're going to the Kutztown show DKinYork over on ARF lives in York. Dennis may be able to help you out.
#6

I doubt I'll be able to make Kutztown. Usually I end up working that weekend no matter what I do. That and the van still needs work. Got some of it done now, but with no garage we are at the mercy of the weather!

No matter where you go, there you are.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM

[-]
Who's Online
There are currently 465 online users. [Complete List]
» 1 Member(s) | 464 Guest(s)
Avatar

>