Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Console ID
#1

Hello all,
I hope I am posting this to the correct forum, if not please just remove it.

I am pretty new here, however I'm not new to radio restoration.  Mainly I've done military and communication type receivers and transmitter for the past 30 or so years...

I am returning a favor for my niece who gave me an E.H. Scott 510 by getting an old Philco console working for her.  I am pretty sure I have the correct schematic for the chassis, but I simply can not identify this specific radio.  I have found versions of the 118, the 18 and now a 59 that look very similar to it, but every time I think I've found it, I discover something a little different on the cabinet.

Can any of you Philco experts tell me what model and version this is?  If more photos are needed, let me know.  I hope the attachments comes through...  TIA!  Brian


Attached Files Image(s)
       
#2

Hi and welcome,

It is either an 18X or a 118X. How to tell the difference:

If it is an 18X, it will be AM only.

If it is a 118X (and I suspect it probably is), it will have the AM band on the dial plus SW frequencies of 4.2 to 12 mc (MHz) also on the dial.

Model 59 is a very small four tube table model radio which looks nothing like this console, so we can eliminate that from contention. Icon_smile

--
Ron Ramirez
Ferdinand IN
#3

Thank you Ron!  Yes, it does have the shortwave band, so we know it's not an 18X.  I saw a 59C posted somewhere that someone must have mislabeled since it looked like this one.
It seems the variations I've seen are the little emblems, or emblem at the top.  This one has two on each side of center (one missing), and I've seen some with one dead center at the top.  Just little things like that kept me from coming up with something that was identical!  Thanks again!

Brian
#4

I hate to be a problem child, however this is what I am talking about in some small variations.  These two are shown on the Philco site for the 118X.
The first link is identical to ours except for those two little musical emblems at the top.  The one in the link has only one in the center.
The second one is not very close, especially the top
UPDATE: I just found some more small variations in the cabinet that do not match either of these. Subtle, but certainly different.
http://philcoradio.com/gallery2/1935b/#Model_118X
http://philcoradio.com/gallery2/1935a/#Model_118X

Maybe this was common to have a certain version that had some random variations, but I just don't know.  I do think you are absolutely correct in that it is some version of a 118(x).

Regards,
Brian
#5

That set looks super, I would be tempted to leave cabinet alone, maybe a clean up, even with the wear looks very period. 

Good luck. 

Paul

Tubetalk1
#6

Thanks Paul!  Yes, it does look nice.  It belongs to my niece and I might just do some very light cosmetic work and be done with it.  I do have a lot of veneer and might replace the top as it looks pretty bad.  She is quite a collector, but does not work on them, so I told her to pick one and I'll get it going!

Brian




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Restoration of the Canadian General Electric A-87
Thanks for your help Michael. In fact, this video is only an intermediate result. Later I had to apply another tinting l...RadioSvit — 09:01 AM
Restoration of the Canadian General Electric A-87
Great job on the cabinet. PS. In the US notation, "kenotron" refers to specific type of tubes; we call re...morzh — 08:24 AM
Part numbers to model cross
This document has at least some tables of models and parts used. Example: Choke 32-7572, used in 604 radio. Search f...morzh — 08:19 AM
Restoration of the Canadian General Electric A-87
I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM
Restoration of the Canadian General Electric A-87
Well... While the varnish is drying up, I started repairing the chassis... Of course I started by replacing the pa...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM
Part numbers to model cross
Jim, We have this index put together by Dale Cook but I don't think that is quite what you are looking for. The Parts...klondike98 — 09:37 PM
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM

[-]
Who's Online
There are currently 1036 online users. [Complete List]
» 1 Member(s) | 1035 Guest(s)
Avatar

>