1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco Electronic Restoration

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Threaded Mode
41-295 Tube Substitution/Antenna
purplecase
Junior Member
**
Posts: 5
Threads: 2
Joined: Mar 2017
City: Lakewood State, Province, Country: CO
#1

09-02-2018, 07:43 PM
This radio came to me with a 7C7 in place of one of two 7B7's. Is this a useable substitute? The sub lists I have looked at say yes and no.
http://www.nostalgiaair.org/pagesbymodel...013422.pdf
(This post was last modified: 09-03-2018, 02:25 PM by purplecase.)
Find
sam
Phorum Expert
*****
Posts: 2,575
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
#2

09-02-2018, 08:14 PM
pretty much the same
yes it will work
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Find
purplecase
Junior Member
**
Posts: 5
Threads: 2
Joined: Mar 2017
City: Lakewood State, Province, Country: CO
#3

09-03-2018, 02:24 PM
Thank you. Also, as the antenna is missing, I would like to duplicate the original. Can anyone describe it, or have better pictures than RadioMuseum?
(This post was last modified: 09-03-2018, 05:01 PM by purplecase. Edit Reason: spellling )
Find
« Next Oldest | Next Newest »
Thread Closed




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Part numbers to model cross
This document has at least some tables of models and parts used. Example: Choke 32-7572, used in 604 radio. S...morzh — 08:19 AM
Restoration of the Canadian General Electric A-87
I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM
Restoration of the Canadian General Electric A-87
Well... While the varnish is drying up, I started repairing the chassis... Of course I started by replacing the pa...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM
Part numbers to model cross
Jim, We have this index put together by Dale Cook but I don't think that is quite what you are looking for. The Parts...klondike98 — 09:37 PM
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM
Philco 42-345 Restoration/Repair
What does the resistor measure? I think it should be 3.3 Meg. If the oscillator coil has continuity and the resistanc...RodB — 09:03 PM
Philco Model 38-7: what caps & resistors do fail typically?
Good idea to check the coils... then I'll get hold of an incadescent light bulb and see what happens when the unit is sw...Musaeum — 08:49 PM

[-]
Who's Online
There are currently 1400 online users. [Complete List]
» 3 Member(s) | 1397 Guest(s)
AvatarAvatarAvatar

>
  1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco Electronic Restoration