Posts: 18
Threads: 6
Joined: Feb 2018
City: TACOMA
State, Province, Country: WA
Hi all. I have a 71 cathedral that is beautiful but quite silent. I can't seem to get it to oscillate at all. I have rewound the primary (small outer coil) on the oscillator coil but it still won't play. This radio actually belongs to a customer of mine. I have completely recapped it and checked all the resistors and tubes. If someone can take a look he will pay you what ever it takes. Thanks.
If it glows in the dark and heats up the house its MY kind of radio!
Posts: 7,301
Threads: 269
Joined: Dec 2009
City: Roslyn Pa
So are you looking for troubleshooting help to fix it yourself or someone to fix it?
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 18
Threads: 6
Joined: Feb 2018
City: TACOMA
State, Province, Country: WA
I really want to send the chassis and speaker to someone who can take a close look at it and find the problem.
If it glows in the dark and heats up the house its MY kind of radio!
Posts: 16,510
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Has the chassis been recapped and checked otherwise the way it's supposed to before power-up?
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 18
Threads: 6
Joined: Feb 2018
City: TACOMA
State, Province, Country: WA
Yes. I checked it out. The amp works fine, just won't oscillate.
If it glows in the dark and heats up the house its MY kind of radio!
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
(09-24-2018, 12:44 PM)sumnerplace Wrote: I really want to send the chassis and speaker to someone who can take a close look at it and find the problem.
If you do not feel comfortable working on it yourself, then you should do the following:
1. Place an ad in the "Wanted Ads" section of the Phorum.
Go to the Phorum home page - scroll down - keep scrolling until you are close to the bottom of the page - you will see
For Sale or Trade and
Wanted Ads.
2. Use the Resources pages here in the Phroum to find a radio repairman near you.
Look under
Philco Info > Philco Resources.
I see you are in Washington state. There are two radio clubs in your part of the country -
Puget Sound Antique Radio Association and the newer
Inland Empire Antique Radio Society. Contact one (or both) of these clubs and see if they can recommend someone close to you that can work on your radio for you.
http://www.pugetsoundantiqueradio.com/
http://www.iears.org/
--
Ron Ramirez
Ferdinand IN
Posts: 18
Threads: 6
Joined: Feb 2018
City: TACOMA
State, Province, Country: WA
Thanks Ron. I'll do that
If it glows in the dark and heats up the house its MY kind of radio!
Posts: 18
Threads: 6
Joined: Feb 2018
City: TACOMA
State, Province, Country: WA
Ron I can't find the Philco Info page or the Resources page. Can you help me?
If it glows in the dark and heats up the house its MY kind of radio!
Posts: 5,170
Threads: 274
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Posts: 7,301
Threads: 269
Joined: Dec 2009
City: Roslyn Pa
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
