Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help with Garod 1C712d information
#1

I accidentally managed to buy a rather rare and weird device - Garod 1C712D


Year of issue - 1946th. In fact, a very simple apparatus, one-band (Medium Wave), is almost the most simple and technologically cheap AA5, but with a two-stage output cascade. However, it has its own specific differences, which are quite substantially conflicting with each other ...;) I will start with the fact that the apparatus with trans-transformer power, therefore, works from both the alternating and the direct current of 110 ... 120 volts. As for the radio, there is no problem here - on the contrary, it even simplifies the design ... But do not forget that besides the radio we also have an automatic tablet player, in which the engine and which can not be as universal in the power supply. For the first time I saw that in the household apparatus for the life of the AC motor was used inverter - DC converter in the alternating! Very interesting thing.
 I think that in its basis the principle of the vibroconverter is used, although it has not yet studied its design ...
Unfortunately, this recorder does not work on the recorder, although the engine is running ... It's quite complicated mechanics and it's hard to figure out without a manual.
I found the radio scheme on this resource, but unfortunately there the inverter circuits.
http://www.nostalgiaair.org/Resources/

So I have three requests to colleagues ...
1) Where can I find the circuit for this inverter? Model Garod typ 101. Does anyone have any experience with its repair and maintenance?
2) Where can I find a manual for repairing such players?
3) Where can I buy a cartridge?

Тhanks for the help


Attached Files Image(s)
                   
#2

Hi;
  You do have a radio-phonograph combo of a very interesting design, and I think that you are correct about the purpose of the convertor box, have you removed it and opened it up? Most of those I have seen are for operating radios from 6 volt storage batteries, not converting DC mains to AC for an AC motor, though I have heard of such units. You could probably eliminate it, assuming that the motor on the record player is a normal 117 volt, 60 cycle, shade pole type, however that would not help you as the mains frequency is probably 50 cps where you are, so the motor would spin at a slower speed. I have a set of Riders manuals, but they probably won't show you anything that you don't already have, still I will see what they have on these sets if you can wait a day or two.
Regards
Arran
#3

Thank you Arran. I welcome any information. Yesterday I opened this inverter and made a photo.
Top view.
       

Bottom view.
   

This is really a vibration converter




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco Model 38-7: what caps & resistors do fail typically?
Since you stated earlier, you have a console 38-7XX.  They also had a 38-7T (table), and 38-7CS (chairside).  A very nic...GarySP — 01:18 PM
Part numbers to model cross
That I wouldn't know, but sometimes the radio document itself shows one, same as the capacitor cans' etc pinouts.morzh — 12:46 PM
Part numbers to model cross
Thank you morzh, that is exactly what I was looking for. Now , is there some where that shows pinouts for Philco power ...Jim Dutridge — 11:37 AM
Restoration of the Canadian General Electric A-87
Thanks for your help Michael. In fact, this video is only an intermediate result. Later I had to apply another tinting l...RadioSvit — 09:01 AM
Restoration of the Canadian General Electric A-87
Great job on the cabinet. PS. In the US notation, "kenotron" refers to specific type of tubes; we call re...morzh — 08:24 AM
Part numbers to model cross
This document has at least some tables of models and parts used. Example: Choke 32-7572, used in 604 radio. Search f...morzh — 08:19 AM
Restoration of the Canadian General Electric A-87
I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM
Restoration of the Canadian General Electric A-87
Well... While the varnish is drying up, I started repairing the chassis... Of course I started by replacing the pa...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM

[-]
Who's Online
There are currently 1287 online users. [Complete List]
» 1 Member(s) | 1286 Guest(s)
Avatar

>