Posts: 322
Threads: 61
Joined: Mar 2007
City: Toledo
State, Province, Country: OH
I finished the work on my 41-221 chassis and now its time for the cabinet. It smells like its been sitting next to a campfire. I tried putting it in a bag with some charcoal for 2 weeks but that didn't make any difference. I'm thinking about trying Murphys Oil Soap to take away the smell. Any thoughts on that or other ideas?
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
I use febreeze
You can also clear it in satin...
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Smoke smell? It will eventually go away on its own. Or like Kirk said.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
I had a nice Stewart Warner tombstone that had a very nice original finish that I had done a complete electronic resto on and every time I played it for any length of time it smelled just like an old chicken coop. I tried all kinds of things and that smell never went away.
Gregb
Posts: 322
Threads: 61
Joined: Mar 2007
City: Toledo
State, Province, Country: OH
Murphys did not really do anything to get rid of the smell. Its somewhat weakened but still noticeable. Now Ill have to wait until its warmer out so I can reflow the laquer on the cabinet and hope that that will rid the smell.
Posts: 4,894
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
Is the finish on the cabinet in good shape or is it a bit tired? If it's in good shape I would try cleaning the finish with Gojo, just in case it's on the surface, reflowing would only bury the dirt in the finish unless you clean it first. You could also try it on the inside, or spray it with brake cleaner. If push comes to shove, you may have to wash the inside of the cabinet out with TSP, but that would involve hot water, so stick with washing the inside bottom this way, and dry it quick with rags and a heat gun.
Regards
Arran
Posts: 1,205
Threads: 84
Joined: Jan 2014
City: Annapolis, IL
State, Province, Country: USA
I have used clear laquer to seal the inside of a wood cabinet from a musty smell. Had some kitchen cabinets in storage during an overhaul, they drew dampness and smelled awful. I cleaned and coated the inside with clear. It took care of the problem. The outside just cleaned up. It depends on if you want to do this to your radio. Then it will smell like paint for awhile lol.
If I could find the place called "Somewhere", I could find "Anything"
Tim
Jesus cried out and said, "Whoever believes in me , believes not in me but in him who sent me" John 12:44
Posts: 2,159
Threads: 158
Joined: Jan 2013
City: Westland, MI
Hello Jim. Years ago my parents had a fire in their basement. It reeked of smoke odor afterwards. The contractor that repaired the damage brought in an ozone generator and ran it for about 24 hours. If you didn't see the fire damage you would not know it for the lack of odor after that process. Perhaps you could rent a generator and place it and the cabinet in a closet for a few hours. Just a thought. Take care, Gary
"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
Posts: 322
Threads: 61
Joined: Mar 2007
City: Toledo
State, Province, Country: OH
I'm trying a trick using dryer sheets in a plastic bag. I think all its going to do is mask the smell even more but I'm willing to try.
Posts: 816
Threads: 25
Joined: Mar 2014
City: Louisville, KY
I inherited a console stereo that wreaked of cigarette smoke.
I cleaned it with Murphy's Oil Soap, and it did reduce the smell. I wouldn't say it vanished completely, but the Murphy's did make it more tolerable.
Posts: 1,205
Threads: 84
Joined: Jan 2014
City: Annapolis, IL
State, Province, Country: USA
I have used an ozone generator inside cars. They help. Sometimes you need to repeat a few times. I use it in my kids room too
If I could find the place called "Somewhere", I could find "Anything"
Tim
Jesus cried out and said, "Whoever believes in me , believes not in me but in him who sent me" John 12:44
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Shellac is an odor blocker. You can use it as a sanding sealer if you are going to refinish. It would be important to spray the interior of the cabinet as well.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 98
Threads: 2
Joined: Jul 2014
City: Eugene, OR
Since it’s getting to be a nice time of year, I recommend fresh air and sunshine. Leave it out in the air and sun for about three days.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Philco model 38 code 121 not receiving signal.
|
Hello Stormlord,
Well done on rewinding that coil it turned fairly good for your first one.
Sincerely Richardradiorich — 09:12 PM |
Philco model 38 code 121 not receiving signal.
|
Well here it is. It ain't pretty, but hopefully it'll work.
I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM |
Philco 42-345 Restoration/Repair
|
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM |
Philco 42-345 Restoration/Repair
|
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM |
Philco model 38 code 121 not receiving signal.
|
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM |
Testing a speaker and output transformer Trutone A2-G
|
The equivalent of one short turn is basically the same as that of a shorted load.
If it is the primary's turn, then the ...morzh — 03:53 PM |
Testing a speaker and output transformer Trutone A2-G
|
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM |
Philco model 38 code 121 not receiving signal.
|
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM |
Philco model 38 code 121 not receiving signal.
|
Well why not! :lol:Stormlord5500 — 03:14 PM |
Philco model 38 code 121 not receiving signal.
|
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM |
Who's Online
|
There are currently 468 online users. [Complete List] » 1 Member(s) | 467 Guest(s)
|
|
|

|