|
60b V2 veneer type?
07-17-2019, 11:19 PM
Got a 60b that the veneer on the sides and top is toast. Gonna remove all of it. What would be close to the original? I know the finish was 2 tone walnut, but is the veneer walnut as well?
You can call me Jerry if you don't want to use my handle. I get it. Makes some folks nervous. I have a finely tuned horse puckey detector. Don't blame me if it goes off. 
07-18-2019, 12:07 AM
Just to be certain which 60 model you've got - is this the one?
https://philcoradio.com/gallery2/1934a/#Model_60B In any case, there is a similar discussion for the wood on the sides of the model 89B here which I think might be similar on the sides: https://philcoradio.com/phorum/showthread.php?tid=16344
07-18-2019, 01:27 AM
Yes, that's the one. But going through that thread seems to indicate 1/32 thickness. Mine is paper thin. Of course, that's not ruling out that this may be the second time that it was replaced, or that it was sanded a bit much. This radio was subject of someone's half a$$ed cabinet work before and it's now really dark with gloss poly on top.
You can call me Jerry if you don't want to use my handle. I get it. Makes some folks nervous. I have a finely tuned horse puckey detector. Don't blame me if it goes off.
« Next Oldest | Next Newest »
Users browsing this thread: 1 Guest(s) |
|
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
