Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 46-1203 Cartridge Rebuild Help
#1

I am in the process of restoring a 46-1203 for a friend.  The original cartridge is not working (surprise!!).  Been searching the phorums and found links to Syl's instructions, but the links are dead.  I did find this link: https://philcoradio.com/library/index.ph...idge_Types 

Where can I find replacement crystals/elements??

TIA

Joel
#2

It’s not easy to find viable crystal elements these days.  You can use a piezo element but the results are mediocre at best.  I put a P51-3 cartridge in my 46-1203 and it works great!
#3

(09-11-2019, 04:23 PM)Squire Wrote:  I put a P51-3 cartridge in my 46-1203 and it works great!

What is a P51-3?  Where can I get one?
#4

The P51-3 cartridge can be found here:

http://thevoiceofmusic.com/catalog/part_...Categories=

Greg V.
West Bend, WI
Member WARCI.org
#5

Awesome!  Thank you.
#6

Just got the correct link from RonR
https://philcoradio.com/library/index.ph...ebuilding/

https://philcoradio.com/library/index.ph...on-topics/

Do you still have the page up with the broken link so Ron can fix it?? I've been surfing too much and lost in cyberspace lol . . .




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco Model 38-7: what caps & resistors do fail typically?
Since you stated earlier, you have a console 38-7XX.  They also had a 38-7T (table), and 38-7CS (chairside).  A very nic...GarySP — 01:18 PM
Part numbers to model cross
That I wouldn't know, but sometimes the radio document itself shows one, same as the capacitor cans' etc pinouts.morzh — 12:46 PM
Part numbers to model cross
Thank you morzh, that is exactly what I was looking for. Now , is there some where that shows pinouts for Philco power ...Jim Dutridge — 11:37 AM
Restoration of the Canadian General Electric A-87
Thanks for your help Michael. In fact, this video is only an intermediate result. Later I had to apply another tinting l...RadioSvit — 09:01 AM
Restoration of the Canadian General Electric A-87
Great job on the cabinet. PS. In the US notation, "kenotron" refers to specific type of tubes; we call re...morzh — 08:24 AM
Part numbers to model cross
This document has at least some tables of models and parts used. Example: Choke 32-7572, used in 604 radio. Search f...morzh — 08:19 AM
Restoration of the Canadian General Electric A-87
I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM
Restoration of the Canadian General Electric A-87
Well... While the varnish is drying up, I started repairing the chassis... Of course I started by replacing the pa...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM

[-]
Who's Online
There are currently 1329 online users. [Complete List]
» 1 Member(s) | 1328 Guest(s)
Avatar

>