Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Picked up another Philco 37-650
#1

I picked up another radio it’s a Philco 37-650. The cabinet is in pretty good condition, but the chassis is in very bad shape. Looks like the chassis sat in water for quite a while. No sign of water on the cabinet. So I’m guessing is it’s not the original chassis, speaker is trashed too. I took some pictures of the chassis.

[attachment=20339][attachment=20340][attachment=20341]

Do you think it’s worth trying to repair, or should I try to find a replacement?

Philco 41-295X 4 band radio.
I'm 67 years old, in north Idaho.
#2

I would try to find another chassis.
It could be repaired but the effort will be way more significant than usual. Judging by a very sad look of the underchassis, many coils would be open, many wires would need replacement, and it is even conceivable that the whole assembly would need to be dropped and the chassis chemically cleaned and re-plated first.
Personally I am not a big fan of it.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

+1 Mike
Sometimes after doing a bunch of work you can still have odd intermittent issues. That by the time you get it all sorted and buy a "parts" chassis you're better off w/another chassis to fix.

I've got an old Hallicrafters S-11 from 1936. Originally was a nice set and has p/p 6L6's for the audio output. I got cheep. From panel looks good and has all of it's knobs BUT the insides and bottom RUSTY! Haven't quite decided what I'm going to do w/it.
Here's one on YT not mine and as been hacked w/a S meter.  https://www.youtube.com/watch?v=KXTafja70BY  Should just have an eye tube.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got it!

Terry
#4

Thanks for the reply’s, I have to agree I need a new chassis, will start looking around to see if I can find one. Mean while, I will restore the cabinet.

Philco 41-295X 4 band radio.
I'm 67 years old, in north Idaho.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind, even if it's a U.S.N power supply. I have a book somewhere abo...Arran — 02:56 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
hello david, I have a similar generator in my collection that features a cast iron, single-cylinder Briggs & Stratt...radiorich — 01:00 AM
under chassis parts locator diagram for 1938 Zenith 9s262
Has anyone gone to the trouble of creating an under chassis parts locator image?  Yes, I can identify components by foll...bobloney — 08:57 PM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
Try looking at this site the book mark is for a old generator that I was given. David    https://radionerds.com/index.ph...David — 08:36 PM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
Hello Everyone, I am looking for voltage identification for all the pin positions on the socket of a CRV-20130 power su...Tonym4704 — 08:16 PM
Philco P45-6365 Universal Transformer Instruction Manual
Can anyone guide me to where this may be found?GRG — 03:00 PM
54C Complete Teardown/Rebuild
I don't think that I have encountered a 12Z3 before, curious how it uses one of those but includes a #43, which is a 25 ...Arran — 02:17 PM
HiFi (Chifi) tube amp build - but my own design.
It's the other forum. I'm also in DIY, but mostly read there. Honestly, I kinda jumped into this without much thought to...TV MAN — 10:43 AM
Philco 71 Code 125
Hello,  I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated.dconant — 07:57 AM

[-]
Who's Online
There are currently no members online.

>