Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

late 1936 116B Labeling
#1

Hello,
I am just finishing up the restoration on a late 1936 116B.  

   

Here is the cluster of inside case labels:

   


The labeling inside the cabinet contains a label that I had not encountered until this radio - the For Correct Operation label.    It is attached using one staple and is kind of "toasty" and aged.
   

It is 2" X 3 1/8" in size.  Just wondering on what other models this this label / tag used.  From the la
Thanks very much and stay well.
#2

My 116B didn't have much of any labels except or most of the tube layout. The rest lost to time...  How do you like your set?? I think mine is my favorite tabletop set. I do have a couple of 5 band 16B's in the works both needing major cabinet work. I'm curious how they compare to the 116B.


Attached Files Image(s)
   

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

Hi,
I am very impressed with this set.  My go-to set for shortwave entertainment has been my Scott All wave 23. The Philco 116 keeps pace with the Scott in bringing in distant stations.  I really like the two speed tuning knob on the Philco (even though it feels a bit rough - I got to revisit the tuning mechanism again).  The Scott only has single speed tuning.  All this pleasure and it still needs an alignment!  Can't wait till that is done.
So I must agree that the Philco 116B is my favorite table top and definitely one of my all-around favorite radios.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
philco predicta
The model is the holiday without UHF It has no sound and I don't have an oscilloscope or signal generator.cgl18 — 08:51 PM
Philco model 38 code 121 not receiving signal.
I will definitely check my lead length and wire dressing. Thanks for the ideas.Stormlord5500 — 08:06 PM
Philco model 38 code 121 not receiving signal.
Do make sure that you twist the 3 wires from the chassis to the transformer, and dress away from tubes, especially audio...MrFixr55 — 07:38 PM
Philco model 38 code 121 not receiving signal.
The cone unfortunately got damaged when I removed it. The glue that held the cone to the basket was sloppily applied and...Stormlord5500 — 07:12 PM
Philco model 38 code 121 not receiving signal.
So what was wrong with the original speaker? Was the cone damaged? Unless it's totally hopeless I would put it aside as ...Arran — 05:31 PM
My collection presentation
There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM
Electrolytic restuffing/internals
Bridkarl This specific cap you have is the easiset type to restuff. I usually cut it at the upper border of the depr...morzh — 11:35 AM
philco predicta
Hi CGL18, First off, welcome to the Philco Phorum. I have not worked on a TV for a while but here are some givens: ...MrFixr55 — 08:22 AM
Another amp build - here I go again!
Sweet! I actually have a Dynaco Mark 4 that I had been running with 6L6s with no mods. Seemed to my 14-year-old head a...MrFixr55 — 12:57 AM
PT-6 finished!!
Hi Gang, Tube heaters are not "Ohmic" devices (that maintain specified resistance over wide temperature, c...MrFixr55 — 12:03 AM

[-]
Who's Online
There are currently no members online.

>