Posts: 234
Threads: 43
Joined: Mar 2008
City: Mission Viejo, CA
I got a 38-7 today at the SCARS auction for $35 - the winning bidder decided to sell it to me after the event. Any tips or "gotchas" on the cone-centric mechanism?
[Image: http://i269.photobucket.com/albums/jj77/...sfound.jpg]
Posts: 893
Threads: 9
Joined: Mar 2008
City: Vieques, PR USA
State, Province, Country: PR
There's some good write-ups about the Cone Centric Tuning on Chuck Schwark's website.
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
I understand there were different dials for different regions of the country available for this radio, with call letters of stations. I wouldn't mind finding one with CKLW on it.
Mike
Posts: 234
Threads: 43
Joined: Mar 2008
City: Mission Viejo, CA
This one has a dial (or is is just the outer ring?) for the San Francisco area.
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Oh, I never thought it may be just an outer ring rather than the whole dial. Interesting.
Mike
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
The entire dial is one piece, and different ones were printed up for different parts of the country. I think there was also a version available with no call letters imprinted on it.
Congratulations on your acquisition, Stephen. If you can fix that stain on top, you should have a very nice set.
--
Ron Ramirez
Ferdinand IN
Posts: 4,896
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
That looks like a burn mark on top, depending on how deep it is you may or may not be able to remove it, other then that it looks pretty good.
Best Regards
Arran
Posts: 337
Threads: 15
Joined: Nov 2005
City: Ortonville, MI
Nice little set. I have one like this one, and also the chairside model.
I seem to recall that Chuck Schwark was trying to get a list of different dial scales that were made for this model. I wonder how far he got.
I have a Detroit area dial scale, and it does have CKLW on it. However, the '38 model sets were made before the great frequency change of 1941, so none of the station locations on the Cone-Centric dial scales are correct for today. On the Detroit scale, CKLW is at 1030 KC. It's 800 KC now. Also on the Detroit scale, there is a CRCW at 600 KC. I don't remember it at all.
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
It's at 800 now, isn't it? I believe it started on 540 in 1932. Regardless, I like the 38-7 with CKLW on the dial. Didn't the 38-4 also have these regional dials?
Mike
Posts: 3
Threads: 1
Joined: Jun 2010
I've lived in the Detroit area since the 1940s and don't remember a CRCW. CKLW is presently at 800 kHz and has been as far back as I can remember.
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
Doug Houston Wrote:...I seem to recall that Chuck Schwark was trying to get a list of different dial scales that were made for this model. I wonder how far he got..... I did compile a listing of the various Cone-Centric dial part numbers.
They were available only to Philco Dealers to customize a set when purchased.
Different sales regions were sent different sets, etc.
Have to look thru my archive.
Chuck
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
I just added the Cone-Centric Dial Listing info on my website.
Just go to the Cone-Centric section of my site, scroll down to the "Installing the Dial Card"
portion and you will see the new link to the PDF listing for Cone-Centric Dial Card Listing.
http://www.philcorepairbench.com/conecentric/index.htm
By the way, if you have a Model 38-4, 38-, or 38-22 Cone-Centric set that has a dial card NOT on my listing, I would apprciate your sending me an email or PM with the radio model number, the dial part number, station call letters and the dial frequencies for those stations?
Thanks,
Chuck
Posts: 80
Threads: 10
Joined: Sep 2005
City: Warren, Ohio
Chuck:
Very interesting. My 38-4 is from Columbus. I've always suspected as much. It's hard to believe I've owned this radio for 12 years.
Steve Chambers
Posts: 234
Threads: 43
Joined: Mar 2008
City: Mission Viejo, CA
The dark spot on the top of my radio appears to be a spill, perhaps of wax. I scraped it with my fingernail at the auction, then briefly scraped most of it off after bringing it home. Today is cool, but sunny, so I may strip the cabinet.
Chuck's dial listing is quite interesting. I did not check all of the stations, but the Los Anegles dial is still correct for KFI (640) and KNX (1070).
Posts: 67
Threads: 13
Joined: Jan 2006
City: Ambler, PA USA
CRCW in Windsor went on the air in 1935 and later became CBE.
Mike Koste
Gobs of Knobs
Zucksville, PA
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
462ron
|
It’s on the bottom of the homepage of our Philcoradio.com homepage!
Ron462ron — 07:20 AM |
Model 70 Cabinet Trim
|
Steve might have some trim left.
Not sure he is making anything.morzh — 06:12 AM |
Model 70 Cabinet Trim
|
Hello musar,
First all welcome to the forum and yes that is true that steve stopped making trim .
Sincerely Richar...radiorich — 12:13 AM |
Model 70 Cabinet Trim
|
I have recently come into possession of a Model 70. The trim around the base needs to be replaced. If this were years ...musar — 12:07 AM |
philcorepairbench.com - shadow-meter
|
Anyone know of a way to recover these files from the repair bench? Thanks.
fenbach — 11:16 PM |
Philco model 38 code 121 not receiving signal.
|
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM |
Philco model 38 code 121 not receiving signal.
|
A DMM is good enough.
One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM |
Testing a speaker and output transformer Trutone A2-G
|
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now.
Have better volu...murf — 03:43 PM |
Philco model 38 code 121 not receiving signal.
|
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM |
Philco model 38 code 121 not receiving signal.
|
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM |
Who's Online
|
There are currently 249 online users. [Complete List] » 1 Member(s) | 248 Guest(s)
|
|
|

|