Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1935 Philco 89B schematic?
#1

I have looked through the library at the documentation for 1928 -1936 at the documentation for the 1935 model 89B. I cannot find a schematic for a 2 band radio of this model and period. I am thinking of purchasing it from eBay, and would like to know a bit more before I do. It appears to cover standard broadcast and a shortwave band that goes up to at least 15.0 MC. Here is a picture from the listing of the dial...
[Image: https://i.ebayimg.com/images/g/nRMAAOSwS...-l1600.jpg]
Any information and a schematic on this model would be appreciated. It is obviously different from the earlier single band circuit.
#2

I won't give away the eBay item number for your sake; but I found it and that is a 66B, not an 89B. 89 sets have drum dials, not flat dial scales. The only exceptions are the 37-89 and 38-89; neither of which are true 89 sets, of course.

--
Ron Ramirez
Ferdinand IN
#3

Thanks, Ron. Yes, all the 89 sets I found had the drum type dials and covered the wrong range for SW. That's what confused me. The cabinet DOES look very similar, at least to my eyes, so I can understand if the seller misunderstood which set he had. I wonder if he looked at the label inside ? (if one is still there)
1935 89B (which came out in June of 1934)...
[Image: https://philcoradio.com/gallery2/images/...ery_00.jpg]
66B (which came out later in Fall of 1934)
[Image: https://philcoradio.com/gallery2/images/...age_00.jpg]
In fact the production numbers listed for the 66B include the 39B and 89B ! so I suppose the cabinets were the same, although the dial escutcheons do look a little different if you really look closely, and the drilling for the control shafts is slightly different.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently 463 online users. [Complete List]
» 4 Member(s) | 459 Guest(s)
AvatarAvatarAvatarAvatar

>