Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

PHilco 44
#1

Hello my ingles is bad, sorry i'm spanish.
i look for pictures of Philco 44, box and chassis, because i need this picture for restoration of my radio.
i think that is one radio Philco 44, is there some box this model ?
thank you, Mauricio
#2

Here is a picture of the 1934 Model 44 Philco:

[Image: http://radioatticarchives.com/images/p/P..._KBoyd.jpg]
#3

is there other box of model Philco 44 ??
because if you put philco 44, is this the model Philco 44 ????

http://www.wjoe.com/philco441.jpg
#4

This picture above is the Model 44B, which means the Baby Grand cathedral cabinet.

The Model 44 also came in the High Boy cabinet as
the Model 44H

[Image: http://www.philcorepairbench.com/images/44H.jpg]


and the console version Model 44X. The X stands for an inclined speaker sound board.


[Image: http://www.philcorepairbench.com/images/44X.jpg]
#5

hello again, have you pictures of chassis philco 44b
one cuestions have the philco 34 the same box that philco 44B
thank you, Mauricio
#6

No pictures of the Model 44 chassis, only the pictures above.

The Model 34 came in different cabinets - see below.

The Baby Grand case is a flat front with no raised moulding like the 44.


[Image: http://www.philcorepairbench.com/images/34B.jpg]


[Image: http://www.philcorepairbench.com/images/34L.jpg]
#7

thank you,, have you any pictures of chassis 34b ?
because i have one radio, i think that is is 34b o 44b, but i don´t
#8

No, sorry, no pictures of chassis'.

But you can use the TUBE MANUAL section of my website to help identify the chassis you have. Use the tube socket layout diagrams there to see what matches the tubes and locations on the chassis.
#9

Mauricio
Email me at lawnweeds100@yahoo.com and I will send picture of Philco 44 Chassis; it uses 110 volts AC, 2 prong plug. A Model 34 will not have a power transformer and will have a battery cable. -Pedro alias-

Pete AI2V




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM

[-]
Who's Online
There are currently 467 online users. [Complete List]
» 1 Member(s) | 466 Guest(s)
Avatar

>