Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Searching for history
#1

Just today I won a receiver at a local auction. It is "The Crown" 5 tube receiver made by the Custom Built Radio Company in 1931. I am trying to find any information about the company as all I can find are 2 advertisements in radio publications from the time, one of which is for this particular receiver. I already have what I believe to be an accurate schematic, but I would like to know more about the company.


Attached Files Image(s)
           
#2

I also have a Crown similar to yours. I'll dig through my Floyd Paul archives later for more info on the company, but I doubt I'll find much more than you already know. There were a lot of short lived west coast (Los Angeles) radios in the early 30's, with Gilfillian making most of the chassis.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#3

   
Attached is a picture of my Crown radio.

As I suspected any information on the Custom Built Radio Company is pretty sparse.  Combing through some of the Floyd Paul archives he lists Custom Built as one of the minor players in the LA radio scene, probably because they weren't around very long.  In a list of manufacturers he lists a Nick Hiriart (possibly the owner) and an estimated start date of July/August 1931 with no date of when they ceased to exist.  He does mention the lifetime for some companies was a matter of weeks or a few months.

I did find one ad for one of their radios in the June 1931 issue of Western Music and Trades on page 17:

https://worldradiohistory.com/Western_Mu...Trades.htm

If you're interested in the Los Angeles early radio scene you should buy Floyd Paul's books on the subject:

http://www.antiqueradios.org/radio_books.html

There is a tad more info on Custom in supplement #2 of the above.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#4

Thanks! I really appreciate the info. I kind of figured there wouldn't be much more than that. I had found the article you posted, but also found another in a September 1931 issue of "Radio" The National Trade Magazine on page 4 that was specific to "The Crown" receiver that we have.

https://www.google.com/url?sa=t&source=w...8PSSk97QGo




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently no members online.

>