Posts: 4,441
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Picked this up at one of our swap meets in the spring.....very nice, 8 inch speaker, 9 tubes, excellent reception.
Dial was in good shape as well as pointer which is often broken on these, it has been cleaned up and plays very nice.
One of my better RCA's.
https://www.flickr.com/photos/92577012@N...300798953/
Paul
Tubetalk1
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
It reminds me of my parents' Zenith radio / record player. It had an AM radio and a 3 speed cobra-matic turntable. It was a table model like that with a mahogany cabinet. Nice find.
(This post was last modified: 07-24-2022, 10:20 PM by mikethedruid.)
Posts: 3,157
Threads: 59
Joined: Apr 2011
City: Lexington, KY
Nice looking set and I like the dial illumination.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 1,262
Threads: 32
Joined: Jan 2014
City: Wellborn Florida
Posts: 4,441
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
It sounds as good as any of the 50's era Zeniths which I also admire, there is a bakelit version too, see one buy it.
Paul
Tubetalk1
Posts: 2,159
Threads: 158
Joined: Jan 2013
City: Westland, MI
Great find, Paul. Take care and BE HEALTHY! Gary
"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
Posts: 1,248
Threads: 11
Joined: Jul 2020
City: Greenlawn
State, Province, Country: NY
Have the 1R81 Livingston. Nice sound, blows the doors off the similar looking Zenith 7H820 AM FM that also has an 8" Speaker but hey, a 6V6 Power Amp running at 250V beats a 35B5 or 35C5 at 130V (the selenium rectifier yields higher B+ than a 35W4). However, Props to Zenith, as few sets using a 35B5 or 35C5 sound this nice.
FM doesn't work on mine yet. but AM is good and piping an Aux signal into the Amp of this radio yields a warm pleasing sound.
Changed all paper and 'lytic caps to no avail. I don't have a signal generator, so will have to play games with a working radio. 2 strange things about my radio are that the chassis is copper plated (RCA almost always used Cad plating in the 40s, 50, and 60s, and all the paper caps were PHILCO!!!???!!! (and these were originals).
"Do Justly, love Mercy and walk humbly with your God"- Micah 6:8
"Let us begin to do good"- St. Francis
Best Regards,
MrFixr55
Posts: 4,441
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Odd, but you encounter many things in this hobby. Good luck with it.
Paul
Tubetalk1
Posts: 285
Threads: 18
Joined: Nov 2016
City: Cromwell
State, Province, Country: CT
Very nice looking radio! You can’t beat that vintage of AM/FM set for sound quality.
Tony
“People may not remember how fast you did a job, but they will remember how well you did it”
Posts: 4,441
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
It was find at the NEVEC meet, one of my better ones.
Paul
Tubetalk1
Posts: 4,441
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
I have been unable to take this one out of my listening room, anyone have any experience with these. Other than the 6V6 and the nice speaker is there any other reason this set sounds so good, general engineering, tube complement?
Could not find a schematic on Nostalgia air......
Paul
Tubetalk1
Posts: 69
Threads: 4
Joined: Apr 2016
City: washington nj
Hi Paul, Use schematic for 3RF91, which is the plastic version. Bill
Users browsing this thread:
|
|
Recent Posts
|
|
Philco 42-345 Restoration/Repair
|
| Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM |
|
Philco 42-345 Restoration/Repair
|
| Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| The equivalent of one short turn is basically the same as that of a shorted load.
If it is the primary's turn, then the ...morzh — 03:53 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM |
|
Philco model 38 code 121 not receiving signal.
|
| As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Well why not! :lol:Stormlord5500 — 03:14 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM |
|
Testing a speaker and output transformer Trutone A2-G
|
| morzh
Short-circuited turns can be considered as a half-dead transformer.
But on this case transformer will hot and s...Vlad95 — 11:01 AM |
|
Testing a speaker and output transformer Trutone A2-G
|
| I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM |
|
Who's Online
|
There are currently 2207 online users. [Complete List]
» 1 Member(s) | 2206 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
