Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x


My Trans-Oceanic collection.
#1

I'd like to dedicate this section to my favorite part of the collection—the Trans-Oceanics radios.

I've mentioned this famous series of radios before:

https://philcoradio.com/phorum/showthrea...#pid206581
Today, I finally completed the restoration of a Zenith Trans-Oceanics 8G005 radio, which I acquired a long time ago (back in 2012).
The radio was purchased for only $60 with shipping, so it was practically a bargain. But it was in condition near the "firewood".
While I was trying to decide what to do with it, I acquired the missing parts—like an wave-magnet antenna, a carrying handle, tubes, paint, and, most importantly, the determination to begin its restoration. A couple of years ago, I completed the chassis restoration. And now, having gathered my strength, I've completed the hull restoration, fully assembled it, and the first post-war Transoceanic is ready to take its place in my collection.

If you want to work, lie down and sleep, and everything will pass.
#2

This radio at the beginning after some restavration.


Attached Files Image(s)
   

If you want to work, lie down and sleep, and everything will pass.
#3

Ant now.

   

   

   

If you want to work, lie down and sleep, and everything will pass.
#4

[Video: https://www.youtube.com/W9ArCzcTvnU]

If you want to work, lie down and sleep, and everything will pass.
#5

Hello Vlad95,
Very nice! I have about three Zenith Trans-Oceanics in my collection. The one I wish I had kept was the bomber model. I have the sailboat Model 7G605, plus either a 500 series or 600 series, and I also have a 3000-1.

Sincerely Richard
#6

Hello radiorich
TransOceanic it is my favorite  series of devices. Not only Zenith, but all from this category. Of course first priority for tubes devices.
Now I have just several from them - 

My Tranc-Oceanic
My Article about Zenith Trans-Oceanic

But at future I'm look to Zenith H500
and very interstin on Zenith Model 7G605 - Bomber
But this model too rare and expensive.
From non Zenith I very interstin Stromberg-Karlson ARM-8
But this radio also rare and expensive.
But any way I vill added all of them at future.
Also I'm looking for transistors model of Zenith Transoceanoc - Royal-1000, 2000, 3000, 7000. Most attractive is Royal R-7000. This last Zenith Transoceanic model has unbrelivible highest parameters. But this radio most expensive too.

If you want to work, lie down and sleep, and everything will pass.
#7

Yes,
I too want to get a Royal R-7000 I have bidded on few .
Sincerely Richard
#8

Vlad95 beautiful job on that TO. I have a B600 that is my daily driver in the kitchen. My brother liked it so much that I found another one and restored it and gifted it to him!

Ron

Bendix 0626.      RCA T64  Philco 20B
Philco 41-250.    Philco49-500
GE 201.             Philco 39-25
Motorola 61X13. Philco 46-420     Crosley 52TQ
Philco 37-116.    Philco 70
AK 35                Philco 46-350
Philco 620B.       Zenith Transoceanic B-600
Philco 60B.         Majestic 50
Philco 52-944.    AK 84 
#9

Very nice! I also like those Transoceanics. I restored one 8G005YT for a colleague I knew from work and did a second one for myself. They both sounded good when finished and I had all bands working. I did wind up selling the second one when we were moving cross country and I had to cut down the number of sets that got moved. I'm looking for another one now as a new project.
#10

I recently completed the restoration of my second Zenit 8G005, which I purchased as a donor. But after restoring the first, I got a taste for it and, without stopping, restored the second one as well. This is an earlier version with an octal rectifier. I'll post a brief description of this project here a little later.
I'm currently finishing the restoration of a Transoceanic RCA-3BX671. Once it's finished, I'll also post a description of the restoration process.

   

And now I'm waiting delivery from eBay my next purchase – a Zenit Transoceanic H500. It will fill a gap in the Transoceanic lineup.
Zenith H500 on eBay

   

If you want to work, lie down and sleep, and everything will pass.
#11

I'm still looking for a Transoceanics . One of the most desirable, a Stromberg Carlson B 64927, is currently listed on eBay, but the price is too painful. I'm hesitant to spend that much money just yet.

Stromberg Carlson B 64927

   

If you want to work, lie down and sleep, and everything will pass.
#12

>>a Stromberg Carlson B 64927


You mean, AWP-8?


As for H-500 T/O, this is the best-sounding of them all. None of mine sounds as nice.

RCA was Strato-World, not Transoceanic.
Philco was Trans-World.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#13

I also like the Stromberg Carlson, but they don't turn up very often. I sold off my brown Transoceanic as well as the black Y600, but I did a lot of DXing on the Y600 while I had it. I do have a 7G605 Bomber along with the solid state 1000, 3000, Royal 7000, and the R-7000.

My first solid state TO was the Royal 1000 sometime back in the 90's. Just for fun I compared it to a Sangean 803A (possibly a collectors item by now Icon_wink). That performance test was published by Antique Radio Classified and an on-line version can be read here: Transoceanic Performance Test

An item to note is I found that Royal 1000 on the floor of a friends workshop and I did nothing to it except pop in some D cells. If it had some alignment and possible capacitor replacement it might have done much better in the test, but even as-is, it performed very well and bested the Sangean in some tests.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#14

Quote:RCA was Strato-World, not Transoceanic.
Philco was Trans-World.
Naturally, I know that "Transoceanic" is the name of the Zenit super receiver series. It's just the name I use for my entire collection of this class of devices.

Quote: Stromberg Carlson B 64927
This is just copy-paste from eBay post.

My H500 was delivered yesterday.
Exterior condition: 4 out of 5
Interior: 3 out of 5.
I haven't tried turning it on yet; before that, I need to finish the RCA and fix the cracks in the A600's faceplate that my cat made when he knocked the receiver over.

If you want to work, lie down and sleep, and everything will pass.
#15

Hi Vlad95,

That Stromberg Carlson is beautiful, I’d say go for it! You likely won’t regret spending the money but you’ll likely regret passing it up and always remember the one that got away. This maybe explains why I have too many radios  Icon_smile

I just learned about TO radios and was lucky enough to pickup two at a radio swap meet yesterday, see attached. I hesitated on a beautiful Hallicrafters model at a booth then walked around another 15 mins and went back to buy it and it was gone! Anyway got these two Zenith units to add to my collection and restoration list. Thanks for inspiring me with your posts and pictures. George
   

Craftsmanship is an ongoing cycle of learning fueled by patience, persistence, and care, where every project refines our judgment and challenges our skills, in the steady pursuit of the Path to Mastery.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 71 Code 125
Technically, that's C-. B- is chassis ground. The resistor between chassis ground and the HV center tap makes the HV c...MrFixr55 — 11:24 PM
54C Cabinet Refinish
hello Roy, I’d follow Arran’s suggestion and use automotive gasket material, which I keep around for situations like th...radiorich — 10:22 PM
Philco 71 Code 125
This might be one of those cases where it's a ground to an AC voltage and B- to DC.RodB — 08:22 PM
Philco 71 Code 125
Really Rod? I know you would not steer me wrong but AI say this is a short circuit? What if I moved the 6 volt center ta...dconant — 06:40 PM
54C Cabinet Refinish
Roy; Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM
Philco 71 Code 125
Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM
Stromberg Carlson 1500 Squeal
Hello Rob, I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM
My Atwater Kent 84
Well getting around to restoring my AK84. Mike was a big part in me being able to snatch this one a few years ago. I won...462ron — 10:57 AM

[-]
Who's Online
There are currently 2129 online users. [Complete List]
» 2 Member(s) | 2127 Guest(s)
AvatarAvatar

>