Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Grill cloth problems
#1

I'm having problems with my new grill cloth sagging. I'm using an upholstery fabric with fiber backing, glued to a heavy weight cardboard using fabric glue. The cloth is sagging at each of the openings. I'm thinking that the glue is shrinking & stretching the fabric. Any suggestions on how to prevent this?
#2

An underwire bra will generally prevent sagging. Icon_wink
#3

Gravity is the monster some of us can not escape as has been pointed out. Tits inevatible.

If I am going to re-mount a pice of grill cloth on a cardboard, I get it damp then use a number of of sewing pins pins to pull it straight abd get it aligned, and then a drizzle of elmer's along the edges where the sun will never shine again, and leave it till the next day.
#4

Zapping the backside very lightly with several coats of spray can lacquer will stiffen it up. Don't spray so much that it 'wets' because that will show through.
#5

Thanks y'all!
Dave




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently 1010 online users. [Complete List]
» 2 Member(s) | 1008 Guest(s)
AvatarAvatar

>