Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

OH HECK!
#1

I bought a 42-335T from ebay , for $9.90 with shipping it was under $20 , restorable shape missing three knobs, but they are the fairly common knobs , according to the PHILCO GALLARY 9,725 where built, has the old police band, I thought it would be good for tuning in that mystery station at 1700 ,not a really super looking radio, but OK for the price,. When it came in the dial glass was smashed! OH HECK!
Is this dial being reproduced?
#2

Probably someone has a scan or you can doctor up what you have left, make a decal on a ink jet and float it on to a piece of glass or plexiglass. Just remember to invert the image if you want the decal to stick to the back.
#3

Hello, Bill: Check out the repop glass dial for a model 41-230 offered by Radio Daze. Not sure if it will be the same dimensions, but the scale is similar to yours. Your dial should be 540-1600 KHz/1.6-3.3MHz, and the 41-230 is 540-1600KHz/1.6-3.5MHz.
#4

BILL Wrote:I bought a 42-335T from ebay , for $9.90 with shipping it was under $20 , restorable shape missing three knobs, but they are the fairly common knobs , according to the PHILCO GALLARY 9,725 where built, has the old police band, I thought it would be good for tuning in that mystery station at 1700 ,not a really super looking radio, but OK for the price,. When it came in the dial glass was smashed! OH HECK!
Is this dial being reproduced?

I would file a complaint about the glass, it's clear that the set was not packed properly, if everything was bolted down it should not have shattered. In any event it may be cheaper finding a parts set with the same dial, I don't think that there is a repro of the one in this radio and it would cost around $35-40 to have one made from what I heard, whether it is worth it for an AC/DC set will be up to you. There was a fellow on another forum that found a business that does decals for glass windows that could replicate a duplicate dial but I can't remeber the name, just search that other forum for the information.
Regards
Arran
#5

TA Forbes Wrote:Hello, Bill: Check out the repop glass dial for a model 41-230 offered by Radio Daze. Not sure if it will be the same dimensions, but the scale is similar to yours. Your dial should be 540-1600 KHz/1.6-3.3MHz, and the 41-230 is 540-1600KHz/1.6-3.5MHz.

It looks like the dial on the 42-335 has the same coverage if you look at the photo, the font is different but the Police band is also 1.6-3.5 MC so if the dimensions are the same it should be able to track.
Regards
Arran
#6

The dial on the 41-230 in the PHILCO GALLARY looks close ,I found a part number on what's left of my dial glass 27-5717
#7

Recommend you ctc Radio Daze, ask for Brian in the tech section, he should be able to help you with this.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM
54C Complete Teardown/Rebuild
While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project.  O...glyphmon — 11:07 PM
Preliminary work on wife's Silvertone 2014
Hello roy, that great news glad it worked out for you !! Sincerely Richardradiorich — 10:50 PM
Preliminary work on wife's Silvertone 2014
Safety caps arrived today.  Soldered one in and had a successful first power-up.  No magic smoke escaped and it tunes in...glyphmon — 09:53 PM

[-]
Who's Online
There are currently 1676 online users. [Complete List]
» 2 Member(s) | 1674 Guest(s)
AvatarAvatar

>