Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
Well, I already know my set has weak tubes, in fact one is very weak. Anyhow I used to purchase my tubes from a gent in Ohio (Bill or Bob?), Pick-a-Tube I believe. Heck it's been awhile. Anyhow suggestions on were to purchase them?
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Bob Dobush at Find A Tube.
http://www.findatube.com/
Whenever I need tubes, I usually contact Bob first...great prices, great service, no complaints. A good guy to deal with.
Jim Cross at Vacuum Tubes, Inc. (who used to live in Ohio) is another honest seller.
http://www.vacuumtubesinc.com/
When it comes to tubes, the Ohioans are the good guys...not that the others are bad, only that I've had personal experience buying from both and can recommend either one.
--
Ron Ramirez
Ferdinand IN
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
Bob would be the guy, thanks Ron.
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Comrade, the Russians now make 2A3 for your fine American radio.
http://www.tubedepot.com/so-2a3.html
I think there is a Chinese version as well. Available at K-mart, Martha Stewart brand I think.
But, I would look for a used American one (6A3).
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
The same seller also has Sovtek 6A3 tubes. Sold as a matched pair only, $129.95 for the pair.
http://tubedepot.com/so-6a3.html
Don't forget your Tube Cube for your nice, new, expensive Sovtek tubes.
...or, buy two 6A3 tubes from Findatube.com for $28.00 each NOS, or $18.00 each used.
Hmmm...new Sovtek for $129.95 or NOS from Bob for $56.00?
Ask Charlie what he thinks about this choice:
http://www.youtube.com/watch?feature=end...FKfQN5Y7Ds
--
Ron Ramirez
Ferdinand IN
Posts: 7,305
Threads: 270
Joined: Dec 2009
City: Roslyn Pa
Wow!
Bob does have some very good prices on both new and used. Never have bought tubes from him but he is a good source for Sam's folders. Have gotten some TV folders from him over the years. Good guy and fast service.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Picture of Bob watching aliens land starship in his back yard:
[attachment=0]
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
LOL.... I met Bob about 5/6 years ago at an on-site auction. Naturally plenty of tubes to be auctioned for everyone... Nice guy  I did see the Russian versions. But I cannot bring myself to stuff those in one of my fine American made Philco's (or any American radio for that matter). If that's all there was or the American made versions hit $250 a tube, I'll consider it.
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 7,305
Threads: 270
Joined: Dec 2009
City: Roslyn Pa
From what I've heard from some of my ham buddies the Russian tube are ok but the Chinese jobs are not very good. I'd stay away from them. Agree with Ron a good pair of used US tubes is your best and cheaper way to go. The reliability will the best.
GL and hold on to your wallet.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
I have used Bob several times and he is great to deal with. His prices for 6A3s, 6L6s, and 6B4s are better than what you will find on eBay. Plus his tube for sale listing is huge.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Philco Model 38-7: what caps & resistors do fail typically?
|
Since you stated earlier, you have a console 38-7XX. They also had a 38-7T (table), and 38-7CS (chairside). A very nic...GarySP — 01:18 PM |
Part numbers to model cross
|
That I wouldn't know, but sometimes the radio document itself shows one, same as the capacitor cans' etc pinouts.morzh — 12:46 PM |
Part numbers to model cross
|
Thank you morzh, that is exactly what I was looking for. Now , is there some where that shows pinouts for Philco power ...Jim Dutridge — 11:37 AM |
Restoration of the Canadian General Electric A-87
|
Thanks for your help Michael. In fact, this video is only an intermediate result. Later I had to apply another tinting l...RadioSvit — 09:01 AM |
Restoration of the Canadian General Electric A-87
|
Great job on the cabinet.
PS. In the US notation, "kenotron" refers to specific type of tubes; we call re...morzh — 08:24 AM |
Part numbers to model cross
|
This document has at least some tables of models and parts used.
Example: Choke 32-7572, used in 604 radio.
Search f...morzh — 08:19 AM |
Restoration of the Canadian General Electric A-87
|
I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM |
Restoration of the Canadian General Electric A-87
|
Well... While the varnish is drying up, I started repairing the chassis...
Of course I started by replacing the pa...RadioSvit — 07:12 AM |
Philco Model 38-7: what caps & resistors do fail typically?
|
Hello Martin,
Welcome aboard our little community what great Model 38-7
Sincerely Richardradiorich — 12:30 AM |
Philco Model 38-7: what caps & resistors do fail typically?
|
Welcome to the Phorum Martin.
I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM |
Who's Online
|
There are currently no members online. |
|

|