Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 37-89
#1

Hi All...
This is my first post and I'm looking for some information on a Radio that I got. It's a Philco Model 37-89. I'm ultimately looking to sell it, but I'd like to learn more and perhaps a range to ask for it. It does power up and I'm able to tune in 2-3 channels...Any info is appreciated.
#2

Value depends on the radio's condition, both cabinet and chassis/speaker. If the set is original do not recommend that you turn it on again,as 70+ year components are not reliable and if they go they may cause other difficult parts to be ruined.

Recommend you go on eBay to completed auctions to see what others have been willing to offer for your model.
#3

Hi Ra5451

Which version of the 37-89 do you have? Cathedral (rounded top), tombstone (flat top table model), or console (floor model)?

Can you post or furnish photos?

Agree with TA's suggestion about checking eBay prices, but keep in mind that sometimes eBay prices can be inflated over "real world" prices.

--
Ron Ramirez
Ferdinand IN
#4

Here are some pics...Its a flat top unit...


   
   
   
   

#5

The finish is wrong. Looks like stain was used and the original photo-finish has been stripped off.

The price you are asking for it in ebay is too high.

http://www.ebay.com/itm/Vintage1937-Phil...46030ddc21

In it's current condition it is probably worth 40-60 dollars.






#6

TA...thankx for the info...I know nothing about these radios...
#7

Not to mention wrong grille cloth, although reproduction grille cloth is no longer available.

Let's see what the cabinet is supposed to look like. Take a look at this late version 1937 model 37-60B (same cabinet):

[Image: http://www.philcoradio.com/gallery/image...760bv2.jpg]

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently 535 online users. [Complete List]
» 2 Member(s) | 533 Guest(s)
AvatarAvatar

>