Philco 118H Cabinet, Question for Ron
Posts: 244
Threads: 11
Joined: Oct 2011
City: Black Mountain, NC
I have a Philco 118H that needs some TLC. The cabinet veneer appears to be OK, just needing cleaning and condition.
My question to Ron, keeper of the Philco Furniture History book...
The legs on mine have a few pieces that came off the legs. The veneer on the stringers as well is peeling and missing from dampness it was exposed to.
What wood are the legs made from?
What is the cabinet finish/toner color used?
What was the veneer on the stringers?
Posted here rather than a PM so others, including "glennpr" can benefit.
Thanks in advance.
Mike
Cossor 3468
GE 417A
Philco 118H
Radiola 17/100
Scott 800B6
Silvertone 6130
Stromberg 535M
Truetone D1952
(This post was last modified: 04-27-2012, 12:18 PM by PhilcoMike.)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
At work so will have to answer the wood type later...
"a few pieces that can off the legs"? I think you mean came off the legs?
As I recall from the one I had previously (which glennpr now owns) along with one or two others I have seen, I think Perfect Brown would be good for the cabinet overall - something a bit darker than Medium Walnut, but not a lot darker; and it needs to be an "Ultra Classic" product so you don't lose the woodgrain. The front panel originally had a "sunburst" look with the majority being Medium Walnut, with Perfect Brown around the edges. Just take a look at any of the radios being sold by Arran's favorite eBay seller "Foggy", and you will see what I mean - only this effect is on the front panel alone, not on the edges of the cabinet.
--
Ron Ramirez
Ferdinand IN
Posts: 292
Threads: 17
Joined: Aug 2010
City: Yorkville IL
(04-26-2012, 11:52 AM)Ron Ramirez Wrote: At work so will have to answer the wood type later...
"a few pieces that can off the legs"? I think you mean came off the legs?
As I recall from the one I had previously (which glennpr now owns) along with one or two others I have seen, I think Perfect Brown would be good for the cabinet overall - something a bit darker than Medium Walnut, but not a lot darker; and it needs to be an "Ultra Classic" product so you don't lose the woodgrain. The front panel originally had a "sunburst" look with the majority being Medium Walnut, with Perfect Brown around the edges. Just take a look at any of the radios being sold by Arran's favorite eBay seller "Foggy", and you will see what I mean - only this effect is on the front panel alone, not on the edges of the cabinet.
I attached these again. If you need any additional pictures just let me know.
Glenn
http://s1230.photobucket.com/albums/ee48...18left.jpg
http://s1230.photobucket.com/albums/ee48...18full.jpg
http://s1230.photobucket.com/albums/ee48...8front.jpg
Happily back in Illinois..not.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
OK, I have the book in front of me - and, unfortunately, it does not mention the types of wood used.
Looking back, I see Furniture History stops mentioning the types of wood/veneer used after early 1933. Sorry.
The veneer on the top and sides will be some sort of walnut. Exactly what type, quarter-sawn, half-sawn, full-sawn, sawn-shawn, I don't know.
Here are Glenn's photos.
[Image: http://i1230.photobucket.com/albums/ee48...18left.jpg]
[Image: http://i1230.photobucket.com/albums/ee48...18full.jpg]
[Image: http://i1230.photobucket.com/albums/ee48...8front.jpg]
I think I misspoke when I described the toners. It looks like it uses either Maison Brown (Ultra Classic) or Extra Dark Walnut (Tone Finish) on the trim pieces and possibly the legs, with Perfect Brown (Ultra Classic) overall otherwise. I think these tended to be a little bit darker overall than sets using Medium Walnut.
--
Ron Ramirez
Ferdinand IN
Posts: 292
Threads: 17
Joined: Aug 2010
City: Yorkville IL
(04-27-2012, 05:38 AM)Ron Ramirez Wrote: OK, I have the book in front of me - and, unfortunately, it does not mention the types of wood used.
Looking back, I see Furniture History stops mentioning the types of wood/veneer used after early 1933. Sorry.
The veneer on the top and sides will be some sort of walnut. Exactly what type, quarter-sawn, half-sawn, full-sawn, sawn-shawn, I don't know.
I think I misspoke when I described the toners. It looks like it uses either Maison Brown (Ultra Classic) or Extra Dark Walnut (Tone Finish) on the trim pieces and possibly the legs, with Perfect Brown (Ultra Classic) overall otherwise. I think these tended to be a little bit darker overall than sets using Medium Walnut.
Thanks for posting those...I tried but gave up. Seeing these pictures has me re-motivated to finish the shadowmeter coil winding and get the chassis back together and in this cabinet.
Glenn
Happily back in Illinois..not.
Posts: 244
Threads: 11
Joined: Oct 2011
City: Black Mountain, NC
(04-27-2012, 06:17 AM)glennpr Wrote: (04-27-2012, 05:38 AM)Ron Ramirez Wrote: OK, I have the book in front of me - and, unfortunately, it does not mention the types of wood used.
Looking back, I see Furniture History stops mentioning the types of wood/veneer used after early 1933. Sorry.
The veneer on the top and sides will be some sort of walnut. Exactly what type, quarter-sawn, half-sawn, full-sawn, sawn-shawn, I don't know.
I think I misspoke when I described the toners. It looks like it uses either Maison Brown (Ultra Classic) or Extra Dark Walnut (Tone Finish) on the trim pieces and possibly the legs, with Perfect Brown (Ultra Classic) overall otherwise. I think these tended to be a little bit darker overall than sets using Medium Walnut.
Thanks for posting those...I tried but gave up. Seeing these pictures has me re-motivated to finish the shadowmeter coil winding and get the chassis back together and in this cabinet.
Glenn
Thanks Ron, Glenn,
You two are my Philco 118H Heros!!!
Mike
Cossor 3468
GE 417A
Philco 118H
Radiola 17/100
Scott 800B6
Silvertone 6130
Stromberg 535M
Truetone D1952
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
54C Complete Teardown/Rebuild
|
| The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM |
|
54C Cabinet Refinish
|
|
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM |
|
54C Complete Teardown/Rebuild
|
| While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project. O...glyphmon — 11:07 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Hello roy,
that great news glad it worked out for you !!
Sincerely Richardradiorich — 10:50 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Safety caps arrived today. Soldered one in and had a successful first power-up. No magic smoke escaped and it tunes in...glyphmon — 09:53 PM |
|
HiFi (Chifi) tube amp build - but my own design.
|
| Tim, you refer to “AK”. Is that Alaska or Atwater-Kent, or… JoeJoe Rossi — 11:49 AM |
|
Grundig 5088
|
| Skip,
you are back to this one?
As for fixing, Mark Oppat fixes vol. controls. Don't know about Grunding, but woul...morzh — 10:30 AM |
|
Stromberg Carlson 1500 Squeal
|
| I volunteer for a monthly Fixit Clinic in my county. All the fixers tell anyone who brings in a Keurig that it will prob...RodB — 10:24 AM |
|
Stromberg Carlson 1500 Squeal
|
| It's funny, a tale of 2 Keurigs. Friend's mom, an immigrant from Central America who had to leave school at the age of ...MrFixr55 — 09:01 AM |
|
Stromberg Carlson 1500 Squeal
|
| My biggest offender is our Keurig coffee maker. I make sure to keep it unplugged as it is still keeping the water warm w...dconant — 08:45 AM |
|
Who's Online
|
There are currently 2100 online users. [Complete List]
» 1 Member(s) | 2099 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
