Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Tone Control values, Model 14, 91
#1

I'm going though a Model 14LZX, twin speaker chassis and have noticed a certain amount of deformation and leakage around the tar potted condensers in the tone control, part # 06698.
I can't find any values to replace these condensers; does anyone know what they are??

Thanks in advance.
#2

Have you looked at the schematics here on Ron's site in the SCHEMATICS section?
#3

No I hadn't--Thanks Chuck!!
#4

I have the same question posted here.

I have a tone control part number 06698 that has fixed condensers in it but no values on the schematic.

Tried going to the "PhilcoRepairBench.com" (sorry don't know everyone's names yet) site and checked for "Tone control" values but didn't see the part number on the list of Tone controls.

I also checked the schematics section of that site, but didn't find anything there.....always possible I missed it by accident.

Anyway, does anyone have the condenser values inside this tone control part?
#5

You can find Ron's cleaned up schematics here:
http://www.philcoradio.com/tech/schema.htm
What model, code number are you actually working on?

ADMIN EDIT--*UPDATED LINK* https://philcoradio.com/library/index.ph...chematics/

Carl
Northern Panhandle, WV
#6

Thanks so much. Found the the values out there.

My radio is a Model 91 Type 126
#7

I know this thread is older, and none of the links work any more.
I have the same issue, I need to get information on the #06698 Tone Control. The schematic I have shows it having 2 capacitors in it, no values. It's also not in Ray Bintliffs Philco booklet.
Some versions of the Model 91 used a #04787, but that has 3 caps, and information is available.
Anyone have the information on #06698?

Thanks
John N3MUN
#8

Here’s the updated link to Ron’s annotated schematics, hope it helps
https://philcoradio.com/library/index.ph...chematics/
#9

Bob-
PERFECT!
Thanks much for the link and fast response.

Thanks
John N3MUN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Ok MrFixr55,  I have tried the DeoxIT D5 on the band switch and even though it has relieved the tension I felt when turn...osanders0311 — 11:11 AM
Part numbers to model cross
Is there a reference somewhere where you can punch in Philco part numbers and see what models those parts were used in?Jim Dutridge — 10:17 AM
Philco 42-345 Restoration/Repair
Hi OSanders, Look carefully at the band switch. Turn it slowly and "wiggle" it around the desired band. ...MrFixr55 — 12:33 AM
5U4 vs 5Z4 tubes
I think that RCA and GE introduced metal tubes in the USA in 1936.  I don't know if they were being made by RCA, GE or b...MrFixr55 — 11:20 PM
Philco 42-345 Restoration/Repair
Vlad95, Thank you for the stringing guides and wow there are so manyosanders0311 — 06:01 PM
5U4 vs 5Z4 tubes
A pre war Hallicrafters, and an early one too, very nice! 1936 is pretty early for metal tubes too, which would explain ...Arran — 05:58 PM
Philco 42-345 Restoration/Repair
Thanks Rod, "When you hear the background hiss and no station it usually indicates that the oscillator quit" ...osanders0311 — 05:52 PM
Philco 42-345 Restoration/Repair
RodB :beerchug:Vlad95 — 10:22 AM
Philco 42-345 Restoration/Repair
Vlad, you nailed it. Swiss and German roots.RodB — 09:54 AM
5U4 vs 5Z4 tubes
Well this is a Hallicrafters SX/9 circa 1936. No real issues so far although I dodged a real bullet with a cap that was...bridkarl — 07:59 AM

[-]
Who's Online
There are currently 1452 online users. [Complete List]
» 1 Member(s) | 1451 Guest(s)
Avatar

>