Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Atwater Kent mod.75
#1

I have a chance to buy an A.T. mod 75. In good condition. But I"am sure it will need some cap. replacement. Does anyone know if these sets have the rubber wires that I hear get very brittle and hard to work with? Thanks PS. They want 75.00 for this set. Seems like a good price. It is a console.
#2

Is that the lowboy floor type? Seems nice.

Also AK were known for their quality. Don't know about rubber-coated wires, but I'd get it anyway for 75 bucks. Price matches the model. Icon_smile
#3

Hi MORZH, Its a lowboy floor type. I have trouble linking on here. But it is just like pic on radio museum site.
#4

I'd say if it is in good shape, $75 is a steal for a nice AK set. Go for it! Icon_smile

No matter where you go, there you are.
#5

I just got back with the AK. Cabinette in real good shape. Will require some work on chassis. I will try to post pic of it soon.
#6

If I looked up the right model, it is a radio-phono set. Either way, I think you made a good choice! Icon_smile

No matter where you go, there you are.
#7

I do feel good about the buy jayce. You are correct, radio-phono set.
#8

Now the fun begins. Any atwater kent owners out there that might know where to get the schematic for mod. 75? I checked nostalgia air. There is only 2 pages about phono pick-up. Is maybe one of the other mod. the same schematic I.E. the 74 ? Thanks for any help. Mike
#9

Mike

Try here:

http://www.atwaterkent.info/TechData/akS...Index.html

--
Ron Ramirez
Ferdinand IN
#10

Thanks Ron, that's what I needed. Mike
#11

Trying to figure out photo bucket to show pic. of the A.K. I have the instructions from this forum but I'am not seeing any IMG code or box as in instruction.I have the pic uploaded ,just going to try to get it to this post. So if something goofy appears or nothing you know why. LOL


http://s1336.photobucket.com/user/220koh...r/220kohms
#12

Well that failed will try again later. Gave me a headache!
#13

[Image: http://i1336.photobucket.com/albums/o654...971853.jpg]
I hope this works.
#14

The finish looks a little tired and bleached out compared to the highboy console sitting next to it, but at least it is all there and hasn't sat in a damp basement.
Regards
Arran
#15

hello Friends of overseas

There is one Atwater 75 model , seems in good repair , available not far from my house , interesting price .
I ' ll phone the vendor to morow and  l' ll  try to get it ....

I hope to come back with good news to morrow or within few days

kind regards

Claude from France




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM

[-]
Who's Online
There are currently 254 online users. [Complete List]
» 3 Member(s) | 251 Guest(s)
AvatarAvatarAvatar

>