Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Found My Philco Holy Grail!! A 201X
#1

Today is a GREAT day! I found a Philco that I actually never thought would be possible to do. A 1935 201X! My avatar is a 200x which is what I saw on CL couple of years ago and didn't go after. I do like the cabinet on the 200x a lot, but the 201x has BOTH broadcast and shortwave, which is a big bonus in my eyes. Here is the baby just as I found it. The sound absorbing screen on the back got damaged in the move, but I have the pieces and I believe I can make it whole again.

Overall, the cabinet is is nice condition with some scratches, marks, etc. but I will first see how good I can make it look and then reassess. One can cap is gone, but I don't see that as a major issue. The dial scale is all there and intact as far as I can see. No hole in the speaker. I am really glad the grille cloth is available.

[Image: http://i1185.photobucket.com/albums/z345...50a56b.jpg]
[Image: http://i1185.photobucket.com/albums/z345...b506da.jpg]
[Image: http://i1185.photobucket.com/albums/z345...211abb.jpg]
http://i1185.photobucket.com/albums/z345...dd8ca0.jpg[/IMG][/URL]
[Image: http://i1185.photobucket.com/albums/z345...5f0277.jpg]
[Image: http://i1185.photobucket.com/albums/z345...2bb7b9.jpg]
[Image: http://i1185.photobucket.com/albums/z345...dd8ca0.jpg]
[Image: http://i1185.photobucket.com/albums/z345...32f125.jpg]
[Image: http://i1185.photobucket.com/albums/z345...eee1a0.jpg]

Gene
#2

Congrats. on your find Gene. Looks like a great project with lots of potential.
#3

A GREAT find. Considered the 1st Hi-Fidelity radio by Philco.

It will be the centerpiece of your collection once restored.
#4

A very good find! Icon_biggrin

No matter where you go, there you are.
#5

WOW, Gene, that's a great find!!!!

Definitely on my bucket list!!!!
#6

Wow Gene good for you! It is always nice to find a radio that you can only hope to have in ones collection, and when one comes up we just can not believe it. I like the detailed woodwork on the cabinet. Good luck on your find and keep us up to date as to its comming along!
#7

I had a 201X on loan from a collector friend for a year. I wanted to compare it side by side with a later Stromberg-Carlson with the "acoustic labyrinth" for audio quality (the 201X won hands down) but while I had it, I wanted to try improving its appearance. It had some deep scratches, even gouges, in the finish. But the basic finish was glass-smooth; you could shave in front of it. With a little dye in the scratches, they disappeared. From a few feet away all you could see were reflections of objects in the room, so the scratches and gouges weren't noticeable. I recommend putting some effort into cleaning and polishing, and I think you'll be happy with the result.
#8

Thanks for the positive comments everyone!

Alan, I have been cleaning the case up, and I think the sides and upper portion will be ok even with some scratches. The front toned parts, especially on the bottom area have quite a bit of loss, so I may have to redo those areas.

I will say this is the ruggedest cabinet I have seen. Even with no chassis or speaker in it, this thing still weighs! It is built like a tank.

Gene
#9

Beautiful radio Icon_thumbup
That's one I'd like to have but it's a very hard to find radio.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM

[-]
Who's Online
There are currently no members online.

>