Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help: Philco-Ford Console Stereo
#1

Hello I am new to this forum and to Philco/Philco-Ford in general.

I recently acquired a Philco-Ford solid state stereo console and I have been restoring it. I will include a bunch of pictures at the end of this post.

Question 1: I have no idea what kind of stereo it is - does anyone know the model?

Question 2: Everything appears to work. But I think I am missing the needle for the turntable (I have no idea). I have never used a turntable before (I am just 24). Does anyone know where I can get a replacement needle and how to install it?

Thank you for any help,

Seth

[Image: https://scontent-a-iad.xx.fbcdn.net/hpho...4121_n.jpg]

[Image: https://scontent-a-iad.xx.fbcdn.net/hpho...4130_n.jpg]

[Image: https://fbcdn-sphotos-d-a.akamaihd.net/h...1377_n.jpg]

[Image: https://scontent-a-iad.xx.fbcdn.net/hpho...1529_n.jpg]

[Image: https://scontent-a-iad.xx.fbcdn.net/hpho...8314_n.jpg]

[Image: https://scontent-b-iad.xx.fbcdn.net/hpho...4739_n.jpg]

[Image: https://scontent-b-iad.xx.fbcdn.net/hpho...1747_n.jpg]

[Image: https://scontent-b-iad.xx.fbcdn.net/hpho...2977_n.jpg]
#2

It is not a needle - it is called "cartridge". Modern (OK, they are no longer modern but they lingered 'till end of 90s, that makes them modern) turntables use them, and they are electromagnetic pickups.

Examples:

http://www.bhphotovideo.com/bnh/controll...&A=details
http://www.zzounds.com/item--AUTCN5625AL


Some of the tone arms have sockets to connect, some have wires with clips that will go on the cartrige's pins.
Go online, type in "turntable cartrige", contact the seller, give them the model and see if they recommend something.
#3

Actually, Morzh, the cartridge appears to still be there - the stylus (proper terminology for what some folks call needle) is missing.

Without a model number for the unit, there is no way to know...???

--
Ron Ramirez
Ferdinand IN
#4

Ron

OK if it is there (yes I know the stilus word - just do not use a cartridge with a separate stilus) then
http://www.planetdj.com/i--STYLUS15&?utm...googlebase


Thing is I use the single piece cartrige, with no separable stilus. THose are sold as one unit. Although yes, I used to own one with separable...they are a bit inferior, and the price often shows it.
#5

Seth,
Welcome to the Phorum. Pull the unit away from the wall and see if there any numbers/letters on the back of the cabinet. The model number might be back there.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently no members online.

>