Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Correct grille cloth for 1935 89B table model
#1

Can someone point me to the correct name / pattern grille cloth on the Richmond Designs website (http://www.richmonddesignsinc.com/ ) for this 89B? Many thanks.

Greg V.
West Bend, WI
Member WARCI.org
#2

I think whisky rayon is the closest there is.
#3

For a 1935 89B? Like this?

http://www.philcoradio.com/gallery/1935a.htm#af

That would have used this:

[Image: http://web.archive.org/web/2005110317463...g/num5.jpg]

Pattern #5, once available from (the now defunct) Radio Grille Cloth Headquarters. No one reproduces it anymore.

By the way, the Internet Archive's Wayback Machine makes it possible to see what we once had available to us, as a reference:

http://web.archive.org/web/2006010202254...cloth.com/

--
Ron Ramirez
Ferdinand IN
#4

Yes, that's the one, Ron. Many thanks for the info.

Greg V.
West Bend, WI
Member WARCI.org




Users browsing this thread:
[-]
Recent Posts
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM

[-]
Who's Online
There are currently 2218 online users. [Complete List]
» 2 Member(s) | 2216 Guest(s)
AvatarAvatar

>