Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

A few Craigslist finds
#1

Hi everyone. While now in the fourth week of waiting for some period appropriate cloth wire for my 89, I've gotten impatient and cleaned out my local Craigslist of cheap project radios. Icon_biggrin


Here's the real beauty, a 38-7 code 121 in nearly perfect condition. All the cabinet needs is a little black touch-up around the grille, even the cloth is perfect. I don't know anything about it, other than the owner said it worked a few years ago. The expensive components are probably all good. This cone-centric dial is intriguing.

[Image: https://lh5.googleusercontent.com/-FSgZP...C_7965.JPG]


The dial has flame thrower stations from all over the country, like WLW, WSM, KDKA etc. WIS 560 is local and still broadcasting, so it's always been in SC.
[Image: https://lh3.googleusercontent.com/-SiXBW...C_7966.JPG]

[Image: https://lh5.googleusercontent.com/-4eDl8...C_7967.JPG]

[Image: https://lh6.googleusercontent.com/-IoNGm...C_7968.JPG]


Here are the rest. Real junkers, but good practice and hopefully worth a few dollars on ebay once restored. Bendix 753M, Emerson 541, Emerson 659B. Yes, the Bendix has a dial face hand drawn onto a piece of plexiglass. The original glass was fairly fragile apparently.

[Image: https://lh5.googleusercontent.com/-kmMr_...C_7969.JPG]


I've also built a low power 'Police' band transmitter in the basement to service the old Philcos. 1.8Mhz is very quiet. I'm really starting to get into this hobby Icon_smile

The older folks I've bought these from get quite a kick out of an 18 year old interested in 70 year old electronics Icon_biggrin
#2

I cleaned out my craigslist a few weeks ago,lol

Some new stuff but they want way too much money. Now its just a waiting game!

Nice pieces though. projects are fun fun fun... Icon_thumbup

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

Unfortunately my parents will only tolerate so many receivers sitting on the dining room furniture, and my room is beyond full of my projects, and the garage with dad's. There are a couple more radios there I really want to get, but just have no space for.

I envy you guys with entire rooms or even basements devoted to the cause. My 'workbench' is a small patch of carpet in the corner of my room. Life goes on Icon_biggrin


Will
#4

Love the 38-7. I had a chairside and it sounded great
#5

18 is pretty young to get the disease but when you get out on your own you can work on your P.H.D. (Pile higher and deeper)
#6

Icon_lolIcon_lolIcon_lol
#7

The Emerson AM/FM will look neat and sound pretty good when cleaned and restored!

Paul

Tubetalk1
#8

Antique radios are a lot healthier than what I was into when I was 18. Icon_e_wink Icon_silent


...I mean before Boot Camp anyway...

It's not how bad you mess up, it's how well you can recover.
#9

I underwent the same cure. Amazing what they can do.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM

[-]
Who's Online
There are currently 1963 online users. [Complete List]
» 1 Member(s) | 1962 Guest(s)
Avatar

>