Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

westinghouse wr-370 console
#1

Today I found a interesting console..And I do not ever remembering anyone on the phorm talking about westinghouse radios. Is this radio a good performer? The radio chassics has a bit of rust. The cabinet of the radio is in good shape along with the grill cloth..Has anyone else seen or heard this radio play? Icon_confused:
#2

Whats wrong no one can help me out? I hope someone will grt back to me with some information before the console is sold.
#3

I'm not familiar with that model. With 12 tubes, though, it should be a good performer. If you like it, go get it! Icon_smile

--
Ron Ramirez
Ferdinand IN
#4

Hi John
From the diagram looks to be a fairly upper end set. It features a rf amp, separate mixer/ osc tubes, P/P output with a phase inverter tube (unlike most Philco sets) , push button tuning and a phono. Haven't worked on many of the 1940's Westinghouse so don't know if It has rubber wiring. If the price was right I'd get it.
Terry
ps and an Eye tube too!!!
#5

A picture or a link would help so we'd know what the radio looked like. But like Ron said, if you like it, then go for it...

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#6

This has been my approach all along. If I like it, the performance be d**ned.
With that many tubes it cannot completely suck.
#7

Going to go back to the consignment shop today (Wed) hope it is still there It was only $25.00. Thanks guys for the incouragement...Lets see what happens when I get it home! I was told by the wife "we have no more room" when we saw it a couple of days ago.
#8

...and you listen to your wife? Aah, sneak it in when she isn't home a'ready. Icon_wink

But seriously, $25 is a nearly giveaway price, especially for a 12-tube radio...good luck!

--
Ron Ramirez
Ferdinand IN
#9

With the cabinet in a good shape and 12 tubes for 25 bucks.....performance is no longer of interest!
Are you kidding me!
Go and grab that before I go and grab it (OK, not I but someone who is close).
#10

The Radio was still for sale. Took it home and the little women gave me a big stare. I told her dont get your panties in a bunch, it only cost me $25.00. She just walked away an did not say anything.
#11

Well, you got the radio! Now, I wonder how much grief she will eventually give you over it...

No matter where you go, there you are.
#12

Looks pretty nifty.....good luck.
http://www.radiomuseum.org/r/westinghou_wr370.html

Paul

Tubetalk1
#13

Searching in RMorg, I don't see that Westinghouse ever sold a console bigger than 12 tubes before WWII. There were 2 versions; in '37 there was single-IF with AFC, and in '38 there was two-stage IF, no AFC.
#14

Guys the cabinet is in really good condition, maybe a little GOJO to get it cleaned up. But the innereds of the radio has a little bit or more than a little bit of rust. It must of have been stored in a damp place. Hay but for $25.00 Lets see .....No loss or gain...If the tubes check out OK it was a win...win....




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM
54C Complete Teardown/Rebuild
While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project.  O...glyphmon — 11:07 PM
Preliminary work on wife's Silvertone 2014
Hello roy, that great news glad it worked out for you !! Sincerely Richardradiorich — 10:50 PM
Preliminary work on wife's Silvertone 2014
Safety caps arrived today.  Soldered one in and had a successful first power-up.  No magic smoke escaped and it tunes in...glyphmon — 09:53 PM

[-]
Who's Online
There are currently 1718 online users. [Complete List]
» 2 Member(s) | 1716 Guest(s)
AvatarAvatar

>