Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

High-Efficiency Aerial Question
#16

If you do find one of the Philco antenna kits, the rubber insulation on the twisted lead-in will be completely dried out and possibly shorting. When most people got their radios, as we got our 37-650, they improvised putting up the antenna in anything but the way it was intended to be installed.

Those antennae were to be installed outside, strung from possibly a post outdoors to the house, with the lead-in getting to the radio. That would make a good antenna for the set. But my father found that the antenna already on the house from 1926 brought in reception in the set very well. I ended up with the HE antenna strung across the floor joists in the basement, and used it for my radios down there.

My aunt and uncle lived in a second story flat. They bought a Philco 640 (which I now have). It too, had the HE antenna kit. It was strung across a medium sized attic, with the lead-in coming down the front of the house from an attic window. Reception was decent, being enhanced by street car interference from the street in front.

In both cases, reception was good because the RADIO was good. If you simply string a long wire antenna, about 50 feet outside, with appropriate insulators and lightning arrestors, you will get amazing reception on any radio. I have a 50 footer in my attic and it can really make a radio earn its keep.
#17

Resurrecting an old post. I picked one of these up complete. I have one that's incomplete with no box I plan on using. Just a tuned doublet antenna. Interesting to see how one of these will stack up against my 150' long wire.
[Image: http://antiqueradios.com/gallery/d/78458-1/he1.JPG]

[Image: http://antiqueradios.com/gallery/d/78460-1/he2.JPG]

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#18

I'd love to hear the results.

We all tend to pontificate about 'best' antennas but you've got some good road mileage with tweaking Philco front-ends and a good side-by-side comparison with your knowledge and different available sets would be great, if not a legendary ongoing thread - haha. Icon_lol

Go for it!

-ex
#19

exray Wrote:I'd love to hear the results.

We all tend to pontificate about 'best' antennas but you've got some good road mileage with tweaking Philco front-ends and a good side-by-side comparison with your knowledge and different available sets would be great, if not a legendary ongoing thread - haha. Icon_lol

Go for it!

-ex

Legendary?! Icon_confused Icon_lol That'll be the day. Stop teasing me or I'll end up at ARFs clubhouse looking for a hug Icon_rolleyes Icon_wink Anyhoot, since it is a tuned antenna of sorts(matched impedance), and the radio's front end is "supposedly" designed around one. Results would be interesting.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#20

You know what I mean. It can be argued to death on principle, hearsay, and what the barber said, but the reports from an REAL antenna are hard to refute.
#21

exray Wrote:You know what I mean. It can be argued to death on principle, hearsay, and what the barber said, but the reports from an REAL antenna are hard to refute.

Oh yes I do.......................... Icon_arrow I just need to figure out where I'll string it up, and properly support it. No tree's close to me Icon_confused

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#22

Send it up here, Brian. I have more trees than I know what to do with. Icon_lol Although, I also have more antennas than I know what to do with.

Ed
#23

Believe I may install one of the sets I have this weekend. Lets see what she does compared to my long wire.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#24

Anyone gotten any results yet from testing the "High Efficiency Aerial"?
#25

No not yet. I've been waiting for storm season to end. I really didn't want this antenna out there during lightning storms. I'll probably get it going within the next month.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently 1174 online users. [Complete List]
» 3 Member(s) | 1171 Guest(s)
AvatarAvatarAvatar

>