Posts: 16,508
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Today received my Philco 66.
I am sure I overpaid but then I am in NJ an nothing comes up here hence the eBay.
$150 shipping included in the amount.
Age shows in wear, but no egregious damage at all and the cabinet is very solid, this is why I liked it. And the chassis is simply dusty.
http://www.ebay.com/itm/Philco-66-tombst...true&rt=nc
This is the one.
These are my pics of it.
Posts: 239
Threads: 10
Joined: Dec 2013
City: Columbia, SC
That's a fantastic looking radio, congrats! 
Posts: 673
Threads: 148
Joined: Jun 2011
City: Elko,MN.
Great find,
Rub her down with a little Howards restore a finish and your good to go.
Congrats,
murf
Posts: 16,508
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Yep. I think maybe first some GoJo? It looks a bit grimy - could use some cleaning.
Or does GoJo then ingterfere with Howards?
Posts: 673
Threads: 148
Joined: Jun 2011
City: Elko,MN.
I just rub it down with howards using 0000 steel wool, followed with howards wax treatment.
Have fun.
murf
Posts: 16,508
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
OK. So (and I asked that question before) - should I buy any particular shade of Howards or it does not matter muc?
Will medium walnut do?
Posts: 16,508
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Just looked at it and realized all three tube shields are missing. I guess I got so excited about the non-rusty chassis and decent cabinet that I totally overlooked it.
Oh well, can't be perfect.
I think eBay has them for some acceptable price.
Posts: 673
Threads: 148
Joined: Jun 2011
City: Elko,MN.
They have different colors.
Menards has it for about $9.00 a can.
murf
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
Looks nice morzh, I have always admired that cabinet design.
Gregb
Posts: 16,508
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
There's another one with concentric semi circles.
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
Yes, I know that one, it is very nice as well. I do like the 60 series of radios, they work really well with a small tube count.
Gregb
(This post was last modified: 03-11-2014, 11:15 PM by gregb.)
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Here is what you do Mike,
Take her down to bare bones. dismantle the body and lay it flat on a padded surface. using a q-tip and some lacquer thinner brushing counter clockwise in 1" circles, remove the finish. should take about 4 hours if done right. Then remover exactly 1/100th of an inch of the top veneer using a dull hand planer. (very important so you don't get any pink elephants in the finish).........Ok wait, that might have been part of a dream last night?
Or you can just use Howards too. 
I think I need to go back to bed for a while. 
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
(This post was last modified: 03-12-2014, 07:05 AM by OldRestorer.)
Posts: 16,508
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
A nite cap takes care of those.
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
I have a similar model, a 66B. I completed the chassis but the woodwork will have to wait until Spring.
Does anyone know what shade I should use for the front and sides?
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 16,508
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Wow Eric, you really shined up this one; could pass it for a small E.H. Scott chassis
Looks a bit like one of those hot rod car's intestines, all chrome-plated.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Philco model 38 code 121 not receiving signal.
|
|
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM |
|
Philco model 38 code 121 not receiving signal.
|
| Thankyou for the kind words sir.
I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM |
|
PT 6 chassis screws size???
|
| Hello bridKarl,
that sounds right or maybe 8/32 .
Sincerely Richardradiorich — 01:00 AM |
|
PT 6 chassis screws size???
|
| Have this done except for missing chassis screws.
It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Hello Stormlord,
Well done on rewinding that coil it turned fairly good for your first one.
Sincerely Richardradiorich — 09:12 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Well here it is. It ain't pretty, but hopefully it'll work.
I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM |
|
Philco 42-345 Restoration/Repair
|
| Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM |
|
Philco 42-345 Restoration/Repair
|
| Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| The equivalent of one short turn is basically the same as that of a shorted load.
If it is the primary's turn, then the ...morzh — 03:53 PM |
|
Who's Online
|
There are currently 749 online users. [Complete List]
» 1 Member(s) | 748 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
