Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1972 Pioneer model QX-4000
#1

A radio DJ friend of mine recently picked this up and asked me just to clean it up / detail the cabinet for him. He said it's a 1972 and, not knowing any better, I'll go along with that.

   
   
   
   

But what my friend doesn't have are speakers for it with the plug connectors needed for this receiver. Or just the connector ends themselves. Does anyone know a source for these?

   

Greg V.
West Bend, WI
Member WARCI.org
#2

Those are common Cinch-Jones two prong connectors. Available at pretty much any electronics wholesaler.

1972 seems a bit early, but can't say for sure. I know we started selling quad gear in 1973-74 (Fisher) at the shop I worked at.
#3

Fisher's first 4-channel receiver, model 701, was a 1971 model (introduced fall '70) according to a 1971 Fisher catalog I have.

--
Ron Ramirez
Ferdinand IN
#4

I guess being a small town business, we were a little behind the curve.
#5

Thanks for the information, Brenda & Ron. I know my friend will be glad to know. So I need to search for some Cinch-Jones two prong connectors. Do you think Radio Shack would stock these yet? We have one of those in town here.

Greg V.
West Bend, WI
Member WARCI.org




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM

[-]
Who's Online
There are currently 497 online users. [Complete List]
» 3 Member(s) | 494 Guest(s)
AvatarAvatarAvatar

>