Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What is your Pride & Joy radio? Owned or wanted...
#46

From the lanyard ring I assume it is a military weapon. What caliber is it?
#47

It has 6 stations but no volume control, lol
I don't remember the caliber but it is one that I had to have made
The old saying is: Great condition, only dropped once.

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#48

My Pride and Joy is my Zenith 16A61 Stratosphere, Now if I could only find The original Cloth I would be a Happy Camper !!!
#49

Mine is my Grandparents radio (fully restored) that Grampa listened to WGN baseball and Grama listened to
Wally Philips in the mornings. Was able to relive some of my memories listening to it with
them, as well when I was in grade school.

Emerson Model 535
[Image: http://www.philcorepairbench.com/images/535.jpg]


Chuck
#50

I don't really have a favorite. I mostly try to find the little bakelite tabletop ones from the 40's and the wooden tabletop ones from the 30's. I admire the big 30's consoles from afar, but they're not for me. I have one and that's enough.
Jim




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM

[-]
Who's Online
There are currently 765 online users. [Complete List]
» 1 Member(s) | 764 Guest(s)
Avatar

>