Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

124A/ B interstage Hammond xfmrs
#1

Has anyone tried those in any radio using pushpull interstage which needs 4:1 ratio? These have 3:1.
I wonder if it resuls in some loss of power. Also size is smaller.

Had using it result in any negative effects?

Radios like 20, 111, possibly 95, 87.
#2

I used 124E in my sparton 1466 worked as good as the original.
#3

Mike, upon recommendation I too used a 124E on my Fada with P-P 45s. Worked dandy.
Jerry

A friend in need is a pest!  Bill Slee ca 1970.
#4

I too consider them as the modern 'go to' option.
#5

OK ood to know, it too is 1:3 turn ratio (1:9) impedance.
Q1: Is there real advantage over A and B otions? "A" is 27 bucks vs "E" being 45 bucks.

Q2: is there some loss of power due to 1/4 of driving voltage loss? Or does it matter conidering it is a radio?
#6

Q1 for a am radio I doubt you would notice the difference.

Q2 If the radio has a lot of audio gain probably won't notice it if it doesn't it may lack volume on weak stations.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Part numbers to model cross
That I wouldn't know, but sometimes the radio document itself shows one, same as the capacitor cans' etc pinouts.morzh — 12:46 PM
Part numbers to model cross
Thank you morzh, that is exactly what I was looking for. Now , is there some where that shows pinouts for Philco power ...Jim Dutridge — 11:37 AM
Restoration of the Canadian General Electric A-87
Thanks for your help Michael. In fact, this video is only an intermediate result. Later I had to apply another tinting l...RadioSvit — 09:01 AM
Restoration of the Canadian General Electric A-87
Great job on the cabinet. PS. In the US notation, "kenotron" refers to specific type of tubes; we call re...morzh — 08:24 AM
Part numbers to model cross
This document has at least some tables of models and parts used. Example: Choke 32-7572, used in 604 radio. Search f...morzh — 08:19 AM
Restoration of the Canadian General Electric A-87
I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM
Restoration of the Canadian General Electric A-87
Well... While the varnish is drying up, I started repairing the chassis... Of course I started by replacing the pa...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM
Part numbers to model cross
Jim, We have this index put together by Dale Cook but I don't think that is quite what you are looking for. The Parts...klondike98 — 09:37 PM

[-]
Who's Online
There are currently 1366 online users. [Complete List]
» 1 Member(s) | 1365 Guest(s)
Avatar

>