Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Phono Cartridge
#1

I have a 46-1256 radio phono and the phone only lets out a small
sound from the needle/cartridge but not from the speaker. The radio plays great through the speaker. Is the cartridge bad? if so where can I find a cartridge for a Philco radio/phonograph model 46-1256
#2

Welcome to the Phorum!

If it's a table model radio / phono combo, are you sure you don't mean model 48-1256? There wasn't a 46-1256. There was a 46-1226 console radio / phono. The first two digits of your model number indicate the year of manufacture of your set.

At any rate, regardless of which model you have, more than likely the cartridge is bad. You may be able to find a suitable replacement here: http://www.thevoiceofmusic.com/

Or, you may be able to have your cartridge rebuilt here:
http://www.west-techservices.com/

Greg V.
West Bend, WI
Member WARCI.org
#3

Greg, Thanks for the reply,you are right the unit is a 46-1256. West-techservices would be the best bet,they are closed till 5/5/2014 due to moving.
#4

Be sure to mention to West Tech the phono
changer is a Philco Model D-10.

Chuck
#5

Thanks Chuck




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently 529 online users. [Complete List]
» 1 Member(s) | 528 Guest(s)
Avatar

>