Posts: 2,111
Threads: 373
Joined: Jun 2010
City: Dover, OH
No matter where you go, there you are.
Posts: 4,108
Threads: 310
Joined: Nov 2013
City: Kings Park NY
nice project, Looks heavy
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Keep the stove but find a radio chassis that is less rusted.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 2,111
Threads: 373
Joined: Jun 2010
City: Dover, OH
Most AKs you find around here have some rust on the inside. It's that wonderful, humid Ohio air. I doubt finding another complete chassis is going to happen as this one is a bit different from the AK breadboxes I have lying around. For one thing, this unit has a regular electro-dynamic speaker, not the early high-impedance units. It's an eight tube chassis that appears to use push-pull 71's as outputs. Also, I think the 'chassis' is actually part of the cabinet. It appears you can pull out the RF deck and transformer deck separately, but that's it. Actually, it looks like getting the parts out might be a real pill. The original AK instructions even mentions having to cut some wires! Eek!
No matter where you go, there you are.
Posts: 18,427
Threads: 622
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Not so long ago Terry got one.
Posts: 3,231
Threads: 59
Joined: Apr 2011
City: Lexington, KY
Good score! Those are not seen everyday so you did well. I like small funky consoles like those.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Large knob on left is from an earlier AK set.
Posts: 7,323
Threads: 270
Joined: Dec 2009
City: Roslyn Pa
Posts: 2,111
Threads: 373
Joined: Jun 2010
City: Dover, OH
Yep it IS heavy. I was wondering about the knob. I wonder if the spare knob from my parts 42 might be a better match or just leave it be?
No matter where you go, there you are.
Posts: 1,474
Threads: 98
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Wow nice tind! But I would not liked to be zapped Leaning on a all metal radio if the electronic was not up to par....Wow wee...
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
I think the AK-42 knob would work.
Posts: 2,111
Threads: 373
Joined: Jun 2010
City: Dover, OH
A picture with the correct knobs now installed. Makes the radio look a good bit different. Also, got the tuner sort of loose. Two of the gangs turn, but the drive belt for the third is damaged and it appears someone has loosed the nut on the back, causing all the plates to become mis-aligned! Oh well, that can be corrected and maybe a full tuner alignment will help with performance. Oh, the transformer appears good, so major plus there!
No matter where you go, there you are.
Posts: 3,231
Threads: 59
Joined: Apr 2011
City: Lexington, KY
If you need a new belt Adams sells replacement bronze belts for A.K.'s:
http://www.adamsradio.com/
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 2,111
Threads: 373
Joined: Jun 2010
City: Dover, OH
Thanks! I'll have to see if the broken belt is the long or short one.
No matter where you go, there you are.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
54C Complete Teardown/Rebuild
|
| Hello Roy,
here is this one
sincerely Richardradiorich — 12:45 AM |
|
54C Complete Teardown/Rebuild
|
| Richard,
Had grabbed it already but thank you just the same. I find myself wanting to find some way to block out the...glyphmon — 12:03 AM |
|
54C Complete Teardown/Rebuild
|
| Hello roy,
here is a link to the schematic .
Sincerely Richardradiorich — 11:54 PM |
|
54C Complete Teardown/Rebuild
|
| Richard,
The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Did an alignment today which was interesting. IF alignment went great, almost all was already spot-on. Adjusting on th...glyphmon — 11:35 PM |
|
54C Complete Teardown/Rebuild
|
| The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM |
|
54C Cabinet Refinish
|
|
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM |
|
54C Complete Teardown/Rebuild
|
| While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project. O...glyphmon — 11:07 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Hello roy,
that great news glad it worked out for you !!
Sincerely Richardradiorich — 10:50 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Safety caps arrived today. Soldered one in and had a successful first power-up. No magic smoke escaped and it tunes in...glyphmon — 09:53 PM |
|
Who's Online
|
There are currently 1502 online users. [Complete List] » 1 Member(s) | 1501 Guest(s)
|
|
|
|

|