Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 71 cabinet refinish
#1

This Model 71 was purchased new by my wife's grandparents in 1932. Her father gave it to us this past Christmas. Needed a LOT of work, as you can imagine. The radio chassis is over at a friend's place being worked on, so my wife & I tackled the cabinet. This is what it looked like when we got it:

[Image: http://i.imgur.com/YkRgrvcl.jpg]

And what it looks like now:

[Image: http://i.imgur.com/RTm7HTol.jpg]

Removed the old finish with acetone & #0000 steel wool. Used three Mohawk toners to redo it: perfect brown on the sides, brown mahogany on the trim, and dark walnut in the center. The logo is a decal and the grill cloth is a reproduction from eBay.

Doesn't look too bad for our first effort! It helps that my wife is a woodworker. Icon_smile
#2

Looks great, something to be proud of.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 883 online users. [Complete List]
» 2 Member(s) | 881 Guest(s)
AvatarAvatar

>