Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
http://jerseyshore.craigslist.org/atq/4655224956.html
For 30 bucks.
It is working too.
Though no one ever restored it. Was receiving a station when I came, and no hum either.
The guy hapened to be a colleague, plus we knew some mutual acquaintances, so we had a nice chat for some time.
He offered me another tabletop Philo, likely late 40s and a bakelite Z for free, but I did not take them.
Real close to me, 10 minutes maybe.
Posts: 736
Threads: 26
Joined: Jun 2013
City: Hayward, California
Posts: 344
Threads: 38
Joined: Jun 2011
City: Tustin
State, Province, Country: California
Very nice. You got a deal on that one 
Posts: 1,470
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
WOW only you could pull off a score like that....And maybe Oldrestorer!!!
Posts: 14
Threads: 2
Joined: Aug 2012
City: Dale, Wisconsin 54931
Hey,
No fair, the link expired, I wanna see too.
Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Posts: 4,441
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
You know free is the right price! You have willpower Mike.
Paul
Tubetalk1
Posts: 14
Threads: 2
Joined: Aug 2012
City: Dale, Wisconsin 54931
Nice,
Real wood veneer, no photofinish?
Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Posts: 4,894
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
Too bad it wasn't a 37-640MX, but for $30 you can't go wrong if it's all there.
Regards
Arran
Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Other than cabinet, what's the difference?
Posts: 4,894
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
A nicer looking cabinet, with mahogany veneer it looks like, the chassis and the rest would be the same.
Regards
Arran
Posts: 3,157
Threads: 59
Joined: Apr 2011
City: Lexington, KY
I personally like the 640X cabinet styling a little better, but the 640MX seems less common with a production run of only 6,000 vs. 18,500 for the X. In any case that was a good find.... congratulations
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Actually as I am looking at it, I also do like 640X styling better. MX is a bit boxy for my taste though of course I would take it in also.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Philco model 38 code 121 not receiving signal.
|
| Hello Stormlord,
Well done on rewinding that coil it turned fairly good for your first one.
Sincerely Richardradiorich — 09:12 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Well here it is. It ain't pretty, but hopefully it'll work.
I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM |
|
Philco 42-345 Restoration/Repair
|
| Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM |
|
Philco 42-345 Restoration/Repair
|
| Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| The equivalent of one short turn is basically the same as that of a shorted load.
If it is the primary's turn, then the ...morzh — 03:53 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM |
|
Philco model 38 code 121 not receiving signal.
|
| As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Well why not! :lol:Stormlord5500 — 03:14 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM |
|
Who's Online
|
There are currently 473 online users. [Complete List]
» 1 Member(s) | 472 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
