Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
Single layer of small strip(s) of tissue paper soaked in diluted Elmer's white glue (50:50) applied both sides, but just wide enough to bond the crack/tear without unduly stiffening a large area. Also, take a cotton swap in warm water to "pre-wet" the tear edges (both sides) for a better bond the to the dry cone.
Chuck
Posts: 16,510
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I bought contact cement today, did three layers on each side...will see how it behave.
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
There is this great tutorial for speaker repair that someone posted but I cant remember the name........
Oh I know ... ME!
That was before I knew about Syls tutorials.
http://philcoradio.com/phorum/showthread...l#pid64287
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
There is a glue for replacing speaker surrounds that is just right. For a small tear, artist's rubber cement is fine, although the days of paste up artists has passed, good luck getting it a reasonable pricel
Posts: 16,510
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Kirk
The problem is.....I drink ESPRESSO!!!!
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
With beer?
Why am I even bothering to ask
Wait, beer before espresso makes quite the messo
Espresso before beer you're in the clear!
Just made that timeless quote up..
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
(This post was last modified: 12-19-2014, 04:29 PM by
OldRestorer.)
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
think some one is still on happy pills
Posts: 16,510
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Exactly.
Happy pils. Which one is that, The Bud? (it is an unhappy pils for me, I prefer Czech)
Posts: 344
Threads: 38
Joined: Jun 2011
City: Tustin
State, Province, Country: California
I used service cement for years but the last couple years I have been using products made by Springfield speaker repair. A lot of guys that do Hi-Fi speaker repair use their CSA and rubber cements. I finally gave them a try and found that they work very well.
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
You prefer Czech's,
I prefer ca$h.
But I'll take a Czech no matter how much it's written for!
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 16,510
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Note to self:
Check for a check for Czech beer. Check!
Posts: 377
Threads: 105
Joined: Jul 2011
City: Calgary, AB, CA
On any speaker repair that I have done ,I used'' Pliabond'' It is made by Goodyear and it never gets hard.
I am not sure where you can get it .. I get mine at Home Hardwar.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
