Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What should I do here?
#1

Ok so you all know I got that 45 butterfly and rebuilt it. Mike did my chassis and she looks good and plays great.

I recently came into another 45 cabinet only. It is complete and just needs a new finish. The one I restored had nothing salvageable but the top molding from the top, Front was dead except for the veneer but I had a good bottom good grill cloth, and ok sides.

The only issue as I found out now from looking at the new cabinet is that someone cut the bottom front molding of my rebuilt one flat and it should have a 45 degree angle to the floor. 

My dilemma is this, do I take my chassis and put it on the new cabinet or leave it in  the one I already re-did?

The original one is a half new cabinet so I think something all original would be better and I could sell or trade the rebuilt cabinet.

What do you guys think?

Keep the old rebuilt?
Go with the all original?

Kirk


Attached Files Image(s)
                   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#2

Keep the cabinet that you like the best...

I typically prefer all original, but have kept a couple of cabinets I have redone because they turned out nice and I had a personal attachment to them.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#3

Hmmmmmm,

I do have a little attachment but I, like you love original.....

If I could make the choice I would ask here Icon_lol

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

kirk
keep all original one
sell other at ktown
sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#5

Think anyone will have interest in a half new cabinet?

Hmmm, $10.00 in wood and veneer, $25.00 for the cabinet and $500.00 in labor Icon_lol

Oh and dont forget it fell off the table after photographing it so it has a little dent and a few chips... Icon_rolleyes

Anyone interested, Icon_lol

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#6

I would keep the one that you spent all the time to recreate intact.  After all, that is something to be proud of.  Put the other cabinet on the shelf for the time being until another chassis comes along or you get a good deal on a parts radio.  Then make another nice radio out of the two.  Once finished, keep them both or sell the one that you have the least attachment to.  Just my thoughts.

Craig R.
#7

Original, to me .. is always nice.
#8

I think I once saw a chassis of a 45 sold on its own.
You might be able to put together one more 45 and those go for a pretty penny.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#9

Others have suggested that you keep the cabinet that you like the best...and I agree.

Model 45 and model 28 (the AC/DC version) come up for sale every so often. Keep an eye out for one, and then you can let go of the complete set that you like the least.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2248 online users. [Complete List]
» 5 Member(s) | 2243 Guest(s)
AvatarAvatarAvatarAvatar
Avatar

>