Philco Radio Speaker Model 531
Posts: 6
Threads: 1
Joined: Apr 2015
City: Pennsylvania
Hello everyone. I have a working Philco Radio Speaker Model 531 in very good condition. I have read a lot of posts but still have not found the correct place to sell the radio and have no idea what would be a fair asking price. Please help. I do not want to try to sell it to high but I also do not want to get ripped off. I am sorry if I had posted this thread in the wrong spot. I do not know anything about antique radios. My father in law used to listen to this radio with his family when he was a little kid. His father bought the radio new and it has been in the attic for a long time. It has a few scratches and a little scuff mark on top. And from what I have researched, it does not have the back panel. It works great. I just plugged it in and listened to it for a little while. It is amazing that a radio so old still works. Even used the fine tuning knob to listen to a local broadcast. Any advice would be well appreciated. Thank you.
(This post was last modified: 04-13-2015, 07:12 AM by ptomt77.)
Posts: 4,108
Threads: 310
Joined: Nov 2013
City: Kings Park NY
I would not know value but this is the right place to sell it. Are you saying you only have the speaker?
As most anyone would say, dont plug it in. The electronics are s old that they can fry your radio, light on fire, capacitors can explode, Transformer can be ruined, etc etc. It is great that it works but where are you located? that will help to let buyers near you have a chance at it.
Welcome!
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 5,584
Threads: 291
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Welcome to the Phorum!! I moved your post to this section. Folks can give you advice and when you decide on a price you can repost in the "For Sale or Trade" section. Be sure to read the posting rules.
Here's some background info on 531.
Posts: 6
Threads: 1
Joined: Apr 2015
City: Pennsylvania
I have the entire radio (except for the back cover). I did not know not to plug it in. It worked fine though. I listened to it for about a half hour while I was cleaning my storage room in the attic.
Posts: 3,231
Threads: 59
Joined: Apr 2011
City: Lexington, KY
Welcome!
Some pictures might help determine value.
Here's a thread about a 531 from a couple of years ago, but it doesn't look like anyone ventured a guess as to what the going value might be:
http://philcoradio.com/phorum/showthread.php?tid=5616
And as mentioned it is very difficult to suggest a price without looking at pictures. A lot will also depend on location, since that is a radio that would be difficult to pack correctly and expensive to ship, so you might be wanting a buyer close enough to do a pick-up.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 6
Threads: 1
Joined: Apr 2015
City: Pennsylvania
I am at work now but at lunch time I will post pics. Thank you very much klondike98, oldrestorer, Eliot Ness and anyone else who replies.
Posts: 6
Threads: 1
Joined: Apr 2015
City: Pennsylvania
Posts: 5,584
Threads: 291
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Posts: 3,231
Threads: 59
Joined: Apr 2011
City: Lexington, KY
Quote:Oh, I am in Easton, Pa
There is a very large Antique Radio Show in Kutztown, PA on May 8 & 9:
http://www.dvhrc.com/kutztown.html
You could possibly offer to deliver it there or someone who is going to the show may be willing to drive over and pick it up in Easton.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 5,584
Threads: 291
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
As one reference point there is an antique dealer asking $225 for a 531 in Georgia (the link may disappear) that they say is fully functional.
Posts: 4,108
Threads: 310
Joined: Nov 2013
City: Kings Park NY
I was just gonna say that about K-town. Thats the best chance to sell it. Ask a few hundred? And take offers.
Ron may know the current worth but dont be surprised is it is low. I have some beautiful consoles that I could not get $100.00 for.
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 6
Threads: 1
Joined: Apr 2015
City: Pennsylvania
Posts: 6
Threads: 1
Joined: Apr 2015
City: Pennsylvania
I will downsize the images. I did that one as a test. Signed up and used Photobucket. By the way, great instructions on pic posting. I will read the rules on posting in selling. I want to thank everyone for their replies. Learned a lot about this radio and enjoyed every minute.
Posts: 7,323
Threads: 270
Joined: Dec 2009
City: Roslyn Pa
Hi and Welcome
Glad you enjoyed your interaction here. I don't believe your set had a back cover. All those hot tubes need air.
http://philcoradio.com/gallery/1929a.htm
Terry
See ya in Ktown. I'm near Willow Grove,Pa
Posts: 4,108
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Looks like it is in fantastic condition but personally I would not pay more than $100.00 for it.
The legged radios have little appeal to me but others love them.
Like I said, ask a few hundred and take offers.
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
under chassis parts locator diagram for 1938 Zenith 9s262
|
| Has anyone gone to the trouble of creating an under chassis parts locator image? Yes, I can identify components by foll...bobloney — 08:57 PM |
|
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
|
| Try looking at this site the book mark is for a old generator that I was given. David https://radionerds.com/index.ph...David — 08:36 PM |
|
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
|
| Hello Everyone,
I am looking for voltage identification for all the pin positions on the socket of a CRV-20130 power su...Tonym4704 — 08:16 PM |
|
Philco P45-6365 Universal Transformer Instruction Manual
|
| Can anyone guide me to where this may be found?GRG — 03:00 PM |
|
54C Complete Teardown/Rebuild
|
| I don't think that I have encountered a 12Z3 before, curious how it uses one of those but includes a #43, which is a 25 ...Arran — 02:17 PM |
|
HiFi (Chifi) tube amp build - but my own design.
|
| It's the other forum. I'm also in DIY, but mostly read there. Honestly, I kinda jumped into this without much thought to...TV MAN — 10:43 AM |
|
Philco 71 Code 125
|
| Hello,
I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM |
|
Stromberg Carlson 1500 Squeal
|
| And life just keeps getting more complicated.dconant — 07:57 AM |
|
54C Complete Teardown/Rebuild
|
| Hello Roy,
here is this one
sincerely Richardradiorich — 12:45 AM |
|
54C Complete Teardown/Rebuild
|
| Richard,
Had grabbed it already but thank you just the same. I find myself wanting to find some way to block out the...glyphmon — 12:03 AM |
|
Who's Online
|
There are currently 2670 online users. [Complete List] » 2 Member(s) | 2668 Guest(s)
|
|
|
|

|