Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1939 Silvertone 7252 Restore on Youtube
#1

Greetings Phorum:
I have a new series on YouTube if anyone is interested,
Link below

https://www.youtube.com/watch?v=KkGbm2GgC40
#2

Great!

Crist
#3

(09-26-2015, 12:49 PM)Crist Rigotti Wrote:  Great!

+1

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#4

Hello Phorum:
Part 2 is now uploaded.
If interested link is below.
https://www.youtube.com/watch?v=EO_1ENuEl9s
#5

Hello Phorum:

Part 3 is now uploaded.
If interested link is below.


https://www.youtube.com/watch?v=Ruy-NJopP8c
#6

Link to part 3:

https://www.youtube.com/watch?v=Ruy-NJopP8c

Great job as always Buzz!

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#7

Hello Phorum:

Part 4 is now uploaded.
If interested link is below.


https://www.youtube.com/watch?v=qG1M6g1LZFQ
#8

Sorry about the Stromberg, but I'm sure you'll get it straighten out one way or another.  Looking forward to see how the lacquer fill works out.

Is that little GE transistor made is the U.S. or Japan?

Thanks again, these are much better than Saturday cartoons!

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#9

thanks....I'll be posting progress reports on the lacquer repair in future videos...Buzz
#10

(10-24-2015, 10:10 AM)Eliot Ness Wrote:  Sorry about the Stromberg, but I'm sure you'll get it straighten out one way or another.  Looking forward to see how the lacquer fill works out.

Is that little GE transistor made is the U.S. or Japan?

Thanks again, these are much better than Saturday cartoons!
As far as I can tell, it was made in USA
#11

Buzz, I watch your videos regularly and LOVED the little 1946 Bendix 0526A radio you featured in one of your recent cinematic efforts. So much so that I did mine up the same way! I hope in this case you go along with the adage that imitation is the sincerest form of flattery, because that three tone color combination hit a home run! Thanks for the inspiration. That little odd color under the tuning knob is glare from the overhead light in the room, not a paint defect.

   

Greg V.
West Bend, WI
Member WARCI.org
#12

(10-26-2015, 10:32 PM)NostalgiaRadioTime Wrote:  Buzz, I watch your videos regularly and LOVED the little 1946 Bendix 0526A radio you featured in one of your recent cinematic efforts. So much so that I did mine up the same way! I hope in this case you go along with the adage that imitation is the sincerest form of flattery, because that three tone color combination hit a home run! Thanks for the inspiration. That little odd color under the tuning knob is glare from the overhead light in the room, not a paint defect.

Wow..Looks great....good job....,,I love the looks on that Bendix model....Buzz
#13

You should go to Hollywood Buzz, I enjoy your productions, from the 110 prefix on the chassis label I am pretty sure that your Silvertone was made by Air King Products in Brooklyn, Air King used that Oatmeal box style antenna in a few models, and it works pretty good. The only AK's in my collection are Air Kings!

PAul

Tubetalk1
#14

(10-29-2015, 09:37 PM)Paul Philco322 Wrote:  You should go to Hollywood Buzz, I enjoy your productions, from the 110 prefix on the chassis label I am pretty sure that your Silvertone was made by Air King Products in Brooklyn, Air King used that Oatmeal box style antenna in a few models, and it works pretty good. The only AK's in my collection are Air Kings!

PAul

thanks paul
#15

Part 5 of my Silvertone series is now uploaded
Here is the link if interested.

https://www.youtube.com/watch?v=U7KNdPv664Y




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM

[-]
Who's Online
There are currently no members online.

>