Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Gilfillan Model 96 schematic
#1

I recently rescued a Gilfillan model 96. Most of the tubes were gone.
My riders does not reference a model 96 so any ideas on tracking down a schematic would be welcome.
The dial scale is also in bad shape. Anyone who might be able to scan a decent one please let me know. Thanks

       
#2

My Gernsback Service manual index shows a schematic for a 96B and a 96X. The B uses Metal-Glass tubes and the X uses Metal tubes:

http://www.radiomuseum.org/r/gilfillan_96.html

Send me a PM with your e-mail address and I'll send you a PDF copy.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#3

(12-26-2014, 03:48 PM)Eliot Ness Wrote:  My Gernsback Service manual index shows a schematic for a 96B and a 96X.  The B uses Metal-Glass tubes and the X uses Metal tubes:

http://www.radiomuseum.org/r/gilfillan_96.html

Send me a PM with your e-mail address and I'll send you a PDF copy.

PM sent thank you
#4

Schematic sent, hope it helps!

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#5

Thanks John

This is great.

Roy
#6

Please keep us updated as you progress on this pretty rare set.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM

[-]
Who's Online
There are currently 1331 online users. [Complete List]
» 3 Member(s) | 1328 Guest(s)
AvatarAvatarAvatar

>