Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Please help id this 48(?) AM/FM radio/phonograph
#1

It looks just like a 48-1262 but has FM. Radio works, phono needs help. Once I have the model number I can start looking for repair resources. If you are slightly colorblind, the yellow letters say 10643D. Don't seem to be able to put photos in the post, so here are links:

[Image: http://farm4.staticflickr.com/3262/26230...z.jpg?zz=1]
DSCN1732 by hazegreen66, on Flickr

[Image: http://farm4.staticflickr.com/3006/26230...z.jpg?zz=1]
DSCN1728 by hazegreen66, on Flickr

[Image: http://farm4.staticflickr.com/3099/26230...e911f4.jpg]
DSCN1727 by hazegreen66, on Flickr

Thanks,

David[/img]
#2

David,

Try looking up a 47-1227. Yours has the crystal pickup version of the D-10 changer. There is a 47-1230 which looks similar but uses Philco's dynamic reproducer on the D-10 changer. There is a tube difference between the two models for the first audio stage. The rest is similar.

Fred




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM

[-]
Who's Online
There are currently 1909 online users. [Complete List]
» 4 Member(s) | 1905 Guest(s)
AvatarAvatarAvatarAvatar

>