Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

L1653-121
#1

Hey all, so my wife and I bought a Philco L1653-121 from a second-hand store a couple years ago. We got a new needle and it all worked great. A few months ago things changed. The radio still worked but only about 80% as loud as previously. The phonograph dropped to about 10% of its previous volume for the instruments and the vocals cut out entirely. My folks were in town over Christmas and my dad thought to cobble together another player with this one but we stopped him halfway through when realizing exactly what he was trying to do and it never got put back together so now it doesn't work at all.

I know first step is to plug the speaker cables back in but I honestly don't know where the H**l they go any more. After that, should I just start with the needle, get a new cartridge, what would likely be the cause of the volume drop? I'm basically a novice but I'm willing to get my hands dirty and work my way through the repairs and just don't know where to start. Pictures of the front, inside, and diagram for whatever help those provide.

[Image: http://imgur.com/hcIhEGm.jpg]
[Image: http://imgur.com/8I7ReZD.jpg]
[Image: http://imgur.com/P8jqoY4.jpg]
#2

hadak
your pic`s did not work
try here
http://philcoradio.com/phorum/showthread.php?tid=29
 sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#3

Thanks, Sam. I think I've got it all put together now.
#4

I can see the pics OK.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2060 online users. [Complete List]
» 3 Member(s) | 2057 Guest(s)
AvatarAvatarAvatar

>