Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

70 speaker
#1

How do you know it is a 70 speaker?
I am buying some speakers and he doesnt remember which are which.

They need re-coning though. Do you want one Fredrick if it needs re-coning?

Me

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#2

(02-25-2016, 08:10 AM)OldRestorer Wrote:  How do you know it is a 70 speaker?
I am buying some speakers and he doesnt remember which are which.

They need re-coning though. Do you want one Fredrick if it needs re-coning?

Me

Sure Kirk, the 70 speaker will have 3 wires coming off transformer to plug it instead of 4. Four wires are for the 90 with push pull other than that I think they are the same. Also I do have enough speaker grill cloth that you asked about, the gold color chain link pattern. PM me
#3

Doesn't the 20 also have the 3 wires... How do I tell it from the 20?
Message me the total for the grill cloth if you are sure you want to sell it.
Me

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

The 20 speaker has four wires also has a nut on the back of the field frame.

Steve 

M R Radios   C M Tubes
#5

(02-25-2016, 11:26 AM)OldRestorer Wrote:  Doesn't the 20 also have the 3 wires... How do I tell it from the 20?
Message me the total for the grill cloth if you are sure you want to sell it.
Me
OK Icon_eek I WILL
#6

Well


Nut is not the tell-tell; some of 90 speakers look same as 70 but electrically are like 20 for pushpull version and like 70 in SE.

The 4 wires mean pushpull (20 and some 90s), 3 mean SE, 70 and some other 90s.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM

[-]
Who's Online
There are currently 869 online users. [Complete List]
» 2 Member(s) | 867 Guest(s)
AvatarAvatar

>