Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

37-116 Standard vs. Deluxe?
#1

How much rarer is the stardard verson versus the deluxe version in the 37-116 console? You very rarely see the standard version.
#2

No production figures exist which break down the numbers of 37-116 Standard vs. De Luxe production; Philco lumped them all together (35,000 total).

If I had to guess, I would say the ratio of standard to De Luxe models is somewhere between 1:6 and 1:12. Probably closer to the latter. Clearly Philco made many more De Luxe 37-116 than standard 37-116 sets.

--
Ron Ramirez
Ferdinand IN
#3

Would one be worth pursuing for at a 3 hour drive and $125? Cabinet is in great condition. Don't know if it works.
#4

Yes I would even if it were Deluxe version.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#5

I'm actually picking up my second 37-116 deluxe tomorrow for $100. Just wondering if a standard would be a good addition to the twins, then I'd have triplets of the 37-116.
#6

Seems like I read somewhere that the std was only made for the first 6 months of production. There are a few different version of these sets (37-116 delux). Early ones have push pins to connect the spkr. Later have a socket/plug. Most have 6B4 tubes but the very late ones have 6A5G and the later ones a different LO circuit, less trimmers.

Terry
#7

I would definitely go for a standard for $125 and 3 hours of driving!
#8

Either version is worth the trip for $125-.

- Geoff




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM

[-]
Who's Online
There are currently 816 online users. [Complete List]
» 2 Member(s) | 814 Guest(s)
AvatarAvatar

>