Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

46-1230 Anyone?
#1

Hello all -

Recently acquired what I thought was a 46-1209, but stamped on the chassis bigger than life is "Model 46-1230". I never knew such a model existed. It has the cabinet of a 1209, a phono like the 1209, three bands (broadcast, pushbutton, and short wave) like the 1209, and the identical tube lineup as the 1209. It does not have FM, or any semblance of an FM dipole antenna like the 47-1230, but it has that strange part number like a 47-1230.

There are some production run numbers stamped on the chassis if that offers a clue: 02 274 04.

Anybody care to guess what I have here? I plan on restoring it, it doesn't look to be in bad shape. In terms of which schematic to follow, anybody have any input there as well?

Personally I think I have some permutation of a 46-1209, only with an oddball model number. I have the 46-1209 schematic from Chuck, but I thought I would check with the experts before digging in. Your thoughts?
#2

Welcome to the Phorum!
Icon_wave
I'll have to defer to Ron or others to answer that question...




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM

[-]
Who's Online
There are currently 922 online users. [Complete List]
» 2 Member(s) | 920 Guest(s)
AvatarAvatar

>