Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Age of a P935?
#1

Hello,
newbie here with a quick question...
I've got a Philco P935 radio and need to know what year it was made. According to the Age Guide on the website,
"Philco sets made after 1953 start with a letter instead of the last two digits of the model year, as follows: B- (1954) C- (1955) D- (1956) E- (1957)
F- (1958) G- (1959) H- (1960) J- (1961) "
So does this pattern continue, making P- a 1967 (or 1966 if they didn't use "O" as a prefix)?
It's a very blocky-looking radio, just a rectangular box with a square speaker grill on the left. Says "ALL TRANSISTOR" on the dial. AM/FM.
Thanks for any help you can give.
-SJC
#2

Hi

Sorry, I am not familiar with that model. Philco's first transistorized radios, which were portables, had a "T" prefix. Could be that yours dates from the mid-1960s? Especially if the sticker on bottom or back states "Philco-Ford Corp."

--
Ron Ramirez
Ferdinand IN
#3

If it's a transistor AM/FM portable, it was definitely made after 1961.
#4

It is an AC operated, all transistor, AM-FM table radio made in Asia. "P" indicates 1966 model year, probably made in late 1965 or early 1966. Both "O" and "I" were skipped in the Home Electronics model number scheme.
#5

Thanks to all who replied - I'm glad to get a date assigned to it.
Happy holidays!
-SJC




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Restoration of the Canadian General Electric A-87
Well... The console body has been restored, while the varnish dries reliably I started repairing the chassis.. ...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM
Part numbers to model cross
Jim, We have this index put together by Dale Cook but I don't think that is quite what you are looking for. The Parts...klondike98 — 09:37 PM
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM
Philco 42-345 Restoration/Repair
What does the resistor measure? I think it should be 3.3 Meg. If the oscillator coil has continuity and the resistanc...RodB — 09:03 PM
Philco Model 38-7: what caps & resistors do fail typically?
Good idea to check the coils... then I'll get hold of an incadescent light bulb and see what happens when the unit is sw...Musaeum — 08:49 PM
Philco 42-345 Restoration/Repair
I have that same set, ain't too much shortwave I like anyway.....it is a good AM DX set. PaulPaul Philco322 — 08:32 PM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum, Martin! Open a new thread in Philco Electronic Restoration when you begin working on your 38-7. ...GarySP — 08:28 PM

[-]
Who's Online
There are currently 804 online users. [Complete List]
» 2 Member(s) | 802 Guest(s)
AvatarAvatar

>