Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

A Big Thanks To All Involved
#1

Johnny has been debugging this radio for many, many hours and days and even weeks now. One of you stepped in (Raleigh) and said check continuity on pin 7 of the 1st IF 7B7 tube. That pin was floating, not connected to anything. Set sings like a bird now.

So a big thanks to all of you who helped me get through this thing. The Philco 41-285. This is my nephews first radio and I kinda let him run with the ball on it. But it's my fault because I rang this circuitry out many times and didn't catch that ungrounded pin 7.

Thanks again for all the help,

Johnny

P.S. Why don't we have one of these "emoticons" that has egg all over its face? I sure would put it next to my name today.
#2

We could all use one of those "egg on face" emoticons for some nagging little problem we never thought to check for!

John Honeycutt
#3

Sometimes it just needs a second pair of eyes to look at the problem. That's what we all find here. I am amazed at the things I have missed that another kind contributor spots instantly, and replies to my questions (when they should be working.) The knowledgebase is really impressive. I always contribute when I feel I can.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2182 online users. [Complete List]
» 4 Member(s) | 2178 Guest(s)
AvatarAvatarAvatarAvatar

>